INSTRUMENT AND CONTROL FUNCTIONS
3-31
3
With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is turned on.
3. Turn the key on.
4. Shift the transmission into the neutral position.
5. Keep the front or rear brake applied.
6. Push the start switch.
Does the engine start?
With the engine still running:
7. Move the sidestand up.
8. Keep the front or rear brake applied.
9. Shift the transmission into gear.
10. Move the sidestand down.
Does the engine stall?
After the engine has stalled:
11. Move the sidestand up.
12. Release the brake.
13. Push the start switch.
Does the engine start?
The system is OK.
The vehicle can be ridden.
The neutral, the brake switch or the YCC-S
system may be defective.
The vehicle should not be ridden
until
checked by a Yamaha dealer.
The sidestand switch may be defective.
The vehicle should not be ridden
until
checked by a Yamaha dealer.
A brake switch may be defective.
The vehicle should not be ridden
until
checked by a Yamaha dealer.
NO
YES
YES
NO
YES
NO
U2D222E0.book Page 31 Wednesday, October 17, 2007 3:50 PM
ProCarManuals.com
Summary of Contents for FJR1300AS(X)
Page 1: ...2D2 28199 22 FJR1300ASX OWNER S MANUAL ProCarManuals com ...
Page 2: ...U2D222E0 book Page 2 Wednesday October 17 2007 3 50 PM ProCarManuals com ...
Page 102: ...A5 yoko_Blank fm Page 1 Tuesday April 8 2003 11 43 AM ProCarManuals com ...
Page 103: ...A5 yoko_Blank fm Page 1 Tuesday April 8 2003 11 43 AM ProCarManuals com ...