Yamaha FJR 2007 Owner'S Manual Download Page 45

Page: 45 / 112

INSTRUMENT AND CONTROL FUNCTIONS

3-27

below and have a Yamaha dealer re-
pair it if it does not function proper-
ly.

EAU40521

Ignition circuit cut-off system

The ignition circuit cut-off system (com-
prising the sidestand switch and brake
light switches) has the following func-
tions.

●

It prevents starting when the side-
stand is up, but neither brake is ap-
plied.

●

It prevents starting when either
brake is applied, but the sidestand
is still down.

●

It cuts the running engine when the
sidestand is moved down.

Periodically check the operation of the
ignition circuit cut-off system according
to the following procedure.

WARNING

EWA10260

●

The vehicle must be placed on
the centerstand during this in-
spection.

●

If a malfunction is noted, have a
Yamaha dealer check the sys-
tem before riding.

U2D211E0.book Page 27 Friday, January 5, 2007 3:56 PM

Summary of Contents for FJR 2007

















































































































Search results

Summary of Contents for FJR 2007

Reviews:

Related manuals for FJR 2007

Brands by name

Popular brands

Yamaha FJR 2007, Owner'S Manual

Search results

Summary of Contents for FJR 2007

Reviews:

Related manuals for FJR 2007

Brands by name

Popular brands