Yamaha FJR 2005 Owner'S Manual Download Page 37

Page: 37 / 102

INSTRUMENT AND CONTROL FUNCTIONS

3-21

WARNING

EWA14420

●

Do not exceed the load limit of 1
kg (2 lb) for storage compart-
ment A.

●

Do not exceed the load limit of 3
kg (7 lb) for storage compart-
ment B.

●

Do not exceed the maximum
load of 212 kg (467 lb) for the ve-
hicle.

EAU39480

Accessory box

The accessory box is located beside
the meter panel.

To open the accessory box

1. Insert the key into the main switch,

and then turn it to “ON”.

2. Push the accessory box button,

and then open the accessory box
lid.

3. Turn the key to “OFF” to preserve

the battery.

To close the accessory box

1. Fold the accessory box lid down.
2. Remove the key.

CAUTION:

ECA11800

Do not place heat-sensitive items in
the accessory box. The accessory
box gets extremely hot especially
when the engine is running or is hot.

WARNING

EWA11421

●

Do not exceed the load limit of
0.3 kg (0.66 lb) for the accessory
box.

●

Do not exceed the maximum
load of 212 kg (467 lb) for the ve-
hicle.

1. Storage compartment B

1. Accessory box

2. Accessory box button

U3P620E0.book Page 21 Tuesday, January 24, 2006 10:47 AM

ProCarManuals.com

Summary of Contents for FJR 2005







































































































Search results

Summary of Contents for FJR 2005

Reviews:

Related manuals for FJR 2005

Brands by name

Popular brands

Yamaha FJR 2005, Owner'S Manual

Search results

Summary of Contents for FJR 2005

Reviews:

Related manuals for FJR 2005

Brands by name

Popular brands