Yamaha F9.9B, Ower'S Manual

Page: 45 / 124

E
3-6
EMU01876
CHARGING BATTERY
For T9.9MH
If an accessory battery charging is required,
proceed the following steps for connecting
the charging circuit to the battery. The
charge lead and fuse holder for making the
circuit are provided in the packing.
1) Remove the top cowling and remove
the CDI unit cover.
2) Connect one of the fuse holder termi-
nals to the red free terminal fixed with
the red lead from the rectifier regulator.
1
Fuse holder
3) Reinstall the CDI unit cover and fit the
fuse holder onto the top side of the
cover.
4) Connect the other fuse holder terminal
to the red terminal of the charge lead.
Secure the black terminal (ground) of
the charge lead to the engine, together
with the CDI unit ground terminal.
2
Charge lead
5) Pull out the charge lead through the
grommet on the port and front side of
the bottom cowling.
6) To connect the leads to the battery, see
“Checking battery” for the correct pro-
cedure.
001550
q
001538
w R
B
6G8-9-1L-3 3/26/02 11:57 AM Page 7