F250 SPECIFICATIONS
FEATURES
F70
Four Stroke
RIGGING OPTIONS
KEY SWITCHES AND LANYARDS
•
Command
Link
Compatible
•
Conventional
Compatible
• Command Link Plus
Not Compatible
MISCELLANEOUS
• Command Link Gateway
Compatible
• Analog Gauge Interface
Compatible
• Command Link Triducer®
Compatible
•
Y-COP™
(Immobilizer)
Compatible
• Variable Trolling RPM
Compatible
Consult appropriate Yamaha rigging information and Yamaha Rigging Sheet (YMBS) for complete rigging compatibility and requirements
information for particular confi gurations. All rigging items sold separately.
GAUGES
•
Command
Link®
Compatible
•
Yamaha
Multifunction
Compatible
•
Analog
Compatible
• External NMEA-2000® Display
Compatible
• Command Link Plus
Not Compatible
CONTROLS
•
Mechanical
(Cable)
Compatible
• Multifunction Tiller Handle
Compatible
• Command Link Plus Digital
Not Compatible
Electronic
Controls
• Command Link Digital
Not Compatible
Electronic
Controls
F 70
L
A
Fuel Induction Horsepower
Shaft
Starting Method
Control
Generation
Length
PTT
Method
F = Four Stroke
S = 15"
Blank = PTT & E start
Blank = Remote
A = 1st change on motor
L = 20”
P = PT & E start
Control
B = 2nd change on motor
X = 25”
E = Electric Start
H = Tiller Handle
C = 3rd change on motor
U = 30”
M = Manual Start
C = Command Link
Etc.
J = Jet
Control
MODEL CODE CHART
DIMENSIONS
Overall length . . . A
713 mm (28.1 inches)
Overall width . . . B
386 mm (15.2 inches)
Overall height . . . C
1476 mm (58.1 inches)
Engine transom height . . . D
534 mm (21 inches)
Steering angle . . . E
40 deg. each direction
Reviewed and/or revised 7/1/10
