Operation
65
3.
To prevent steering movement, turn the
steering friction adjuster clockwise.
4.
Tighten the air vent screw.
5.
Disconnect the fuel hose, and then install
the fuel joint cap.
WARNING! When not
using a portable fuel tank, make sure
to install the fuel joint cap. Otherwise,
injury could result from striking the
fuel joint accidentally.
[EWM02411]
6.
Hold the rear of the top cowling and fully
tilt the outboard motor up. Slightly lower
the outboard motor from the fully tilted up
position and fit the tilt support bar secure-
ly into the holder located on the clamp
bracket.
Procedure for tilting up when using optional
portable fuel tank (F4B, F5A, F6C)
When using the portable fuel tank “B”, tilt the
outboard motor up according to the following
procedure.
1. Steering friction adjuster
1. Air vent screw
ZMU06827
1
ZMU06751
1
1. Fuel hose
2. Fuel joint cap
1. Tilt support bar
2. Holder
ZMU06753
2
1
ZMU06829
1
2
U6BV23E0.book Page 65 Tuesday, April 5, 2011 2:38 PM