E
3-5
EMF40012
PRE-OPERATION CHECKS
w
If any item in the pre-operation check is
not working properly, have it inspected
and repaired before operating the out-
board motor. Otherwise, an accident
could occur.
EMF41110
Fuel
8
Check to be sure you have plenty of fuel
for your trip.
8
Make sure there are no fuel leaks or
gasoline fumes.
8
Check fuel line connections to be sure
they are tight.
8
Be sure the fuel tank is positioned on a
secure, flat surface, and that the fuel
hose is not twisted or flattened, or likely
to contact sharp objects.
EMF42210
Oil
8
Check the level of the oil in the sump
with the dipstick. If necessary, add oil to
bring the level up to the upper mark.
EMF43010
Controls
8
Check throttle, shift, and steering for
proper operation before starting the
engine.
8
The controls should work smoothly,
without binding or unusual free play.
8
Look for loose or damaged connec-
tions.
8
Check operation of the starter and stop
switches when the outboard motor is in
the water.
62Y-9-1B-3 6/27/02 10:23 Page 6
Summary of Contents for F50B
