Yamaha F30B 2018, Service Manual

Page: 164 / 348

7-9
Power unit assembly
r. Remove the apron “1”.
s. Install the shackles “1” to the engine hang-
ers “2”, and then install the lifting harness-
es to the shackles “1”.
t. Suspend the power unit.
u. Remove the power unit mounting bolts “3”,
and then remove the power unit.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
Installing the power unit
1. Install:
• Power unit assembly
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Clean the power unit mating surface, and
then install a new gasket “1”.
b. Install the power unit with the power unit
mounting bolts “2”.
c. Tighten the power unit mounting bolts “2”
to the specified torques in 2 stages and in
the order [1],[2], and so on.
1
3
2
2
1
1
3
Power unit mounting bolt “2”
1st: 21 N·m (2.1 kgf·m, 15 lb·ft)
2nd: 21 N·m (2.1 kgf·m, 15 lb·ft)
1
2
2
STBD
PORT
Front
Front
Front
[3]
[4] [1] [7]
[2]
[9]
[8]
[6]
[10]
[5]
2
2
T
R
.
.