Yamaha F30B 2018, Service Manual

Page: 133 / 348

6-6
Fuel filter
Checking the primer pump
1. Check:
• No air leakage
Air leakage

Replace.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Connect the special service tool “1” to the
primer pump inlet “a”.
b. Block the fuel outlet “b” using a rubber plug
“2”, and then apply the specified positive
pressure. Replace the primer pump if the
specified pressure cannot be maintained
for 30 seconds or more.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
Checking the fuel joint
1. Check:
• Fuel joint
Cracked/damaged

Replace.
• Holding pressure
Out of specification

Replace.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Connect the special service tool “1” to the
fuel joint outlet “a”.
b. Apply the specified positive pressure. Re-
place the fuel joint if the specified pressure
cannot be maintained for at least 10 sec-
onds.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
Assembling the fuel filter assembly
1. Install:
• Fuel filter element
• O-ring
• Fuel cup assembly
• Clamp
Vacuum/pressure pump gauge
set “1”
90890-06945
Pressure/vacuum tester “1”
YB-35956-B
Positive pressure
170.0 kPa (1.70 kgf/cm², 24.7
psi)
Holding pressure (positive pres-
sure)
49.0 kPa (0.5 kgf/cm², 7.11 psi)
b
a
1
2
Vacuum/pressure pump gauge
set “1”
90890-06945
Pressure/vacuum tester “1”
YB-35956-B
a: 115–125 mm (4.53–4.92 in)
b: 20–30 mm (0.79–1.18 in)
Fuel cup assembly
5 N·m (0.5 kgf·m, 3.7 lb·ft)
1
a
New
a
b
T
R
.
.