This document contains many of Yamaha’s valuable trademarks. It may also contain trademarks belonging to other companies. Any references to other companies or their products
are for identifi cation purposes only, and are not intended to be an endorsement.
Due to Yamaha’s ongoing commitment to product improvement, we reserve the right to change without notice,
equipment, materials, or specifi cations.
F250 SPECIFICATIONS
Consult appropriate Yamaha rigging information and Yamaha Rigging Sheet (YMBS) for complete rigging
compatibility and requirements information for particular confi gurations. All rigging items sold separately.
SPECIFICATIONS
ENGINE
Type
60° V6 DOHC 24-Valve
Displacement
3352cc (204.6 ci)
Bore x Stroke
94 x 80.5mm (3.70 x 3.17 in)
Full Throttle RPM Range
5000 ~ 6000
Horsepower Rating at Propshaft
250hp at 5500 rpm
Compression Ratio
9.9:1
Fuel
Induction/Scavenging
EFI/VCT/DOHC
Alternator Output
46 Amp (38 Amp @ 1000 rpm)
Starting Method (See Model Code)
T = Electric w/ PTT
Ignition
TCI Microcomputer
Lubrication
Wet Sump
Degree of Trim
-3° t16°
Degree of Tilt
67°
Exhaust
Through Propeller
Cooling
Thermostatic Control
DRIVE
Gear Shift
Forward, Neutral, Reverse
Gear Ratio
15:30 (2.00)
SHAFT LENGTH
See Model Code
X = 25”
FUEL AND LUBRICATION
Recommended Fuel
Regular Unleaded
(Minimum Pump Octane 89)
Recommended Fuel Filtration
Yamaha 10-Micron Fuel/Water
Separating Filter (external)
Ethanol Blend Limit
10% Maximum
Recommended Oil
Yamalube® 4M (See owner’s manual)
Engine Oil Capacity
5.6L (5.9 qt) with fi lter
WEIGHT
F250TXR
273kg (602 lbs)
LIMITED WARRANTY
Pleasure
Three Years
Government
Three Years
Commercial
One Year
FEATURES
POWER/PERFORMANCE
RELIABILITY/DURABILITY
CONVENIENCE/CONTROL
GAUGES
Command
Link
Compatible
Yamaha
Multifunction
Compatible
External NMEA-2000® Display
Compatible
Analog
Compatible
Command Link® Plus
Not Compatible
CONTROLS
Mechanical
(Cable)
Compatible
Command Link Plus Digital Electronic Controls Not Compatible
Command Link Digital Electronic Controls
Not Compatible
KEY SWITCHES AND LANYARDS
Command
Link
Compatible
Conventional
Compatible
Command Link Plus
Not Compatible
MISCELLANEOUS
Command Link Gateway
Compatible
Analog Gauge Interface
Compatible
Command Link Triducer®
Compatible
Y-COP™ (Immobilizer)
Not Compatible
RIGGING OPTIONS
F250
featuring Mechanical Controls
•
Mechanically Remote-Controlled Four Stroke
V6 Outboard
•
Narrow 60° 3.3L Block Design
•
Variable Camshaft Timing
•
Long Track Induction System
•
Electronic Multi-Point Precision Fuel Injection
•
6 Independent Fuel Injectors
•
4 Large Radius Valves Per Cylinder
•
High Intake Valve Lift
•
Double Overhead Camshafts
•
In-Bank
™
Exhaust
•
Exhaust Pressure Reduction System
•
Compact, Lightweight Design
•
California C.A.R.B. Ultra Low Emissions 3 Star Rating
•
Meets all current Federal EPA Emission Standards
•
TCI Microcomputer
•
Electronic Single Throttle Valve (65mm)
•
Direct Drive System
•
Wet Sump Lubrication
•
Engine Warning System
•
Sacrificial Anodes
•
Forged Pistons
•
Water Cooled Rectifier/Regulator
•
Water
Separator
•
Direct
Ignition
•
YDC 30 Aluminum Alloy
•
ACP 221 Paint Process
•
Top Mounted Electrical
•
High Output Alternator
•
SST Drive, Prop, Shift Shafts
•
SST Steering Tube
•
Magnetic Drain Plug
•
Dual Water Intake Gearcase
•
Command Link® System
•
Power Trim & Tilt
•
Freshwater
Flush
•
Easy
Maintenance
•
Reversible PTT Switch
•
Counter Rotation “LF” Model
•
Yamaha Diagnostic System
•
Multi-Charge Monitoring System
•
Single Belt Drive System
© 2010 Yamaha Motor Corporation, U.S.A. All rights reserved.
Primary ID Prefi x: 6P2
Reviewed and/or revised 7/1/10
