E
4-23
000565
w
q
EMU01460
CHANGING GEAR OIL
w
8
Be sure the outboard is securely fas-
tened to the transom or a stable stand.
You could be severely injured if the out-
board falls on you.
8
Never get under the lower unit while it
is tilted, even when the tilt-support
lever/knob is locked. Severe injury
could occur if the outboard accidentally
falls.
1)
Tilt the outboard motor so that the oil
drain plug is at the lowest point possi-
ble.
2)
Place a suitable container under the
gear-case.
3)
Remove the oil drain plug
1
.
NOTE:
The oil drain plug is magnetic. Remove all
metal particles from the plug before rein-
stalling it.
4)
Remove the oil level plug
2
to allow
the oil to drain completely.
c
C
Inspect the used oil after it has been
drained. If the oil is milky, water is get-
ting into the gear-case which can cause
gear damage. Consult a Yamaha dealer
for repair of the lower unit seals.
NOTE:
For disposal of used oil consult your
Yamaha dealer.
68V-9-14-4 3/11/03 19:35 Page 24
