Yamaha Exciter T150 Owner'S Manual Download

Page: 20 / 94

INSTRUMENT AND CONTROL FUNCTIONS

4-1

EAUU0351

Main switch/steerin

lock

The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering, and is used
to open the seat also. The various main
switch positions are described below.

TIP

The main switch is equipped with a
keyhole cover. (See page 4-2 for key-
hole cover opening and closing proce-
dures.)

EAU65810

All electrical circuits are supplied with
power, and the engine can be started.
The key cannot be removed.

TIP



The meter lighting, taillight, license
plate light and auxiliary light come
on automatically when the key is
turned to “ON”.



The fuel pump can be heard when
the key is turned to “ON”.

EAUU1131

OFF

All electrical systems are off. The key
can be removed.

EAUU1042

LOCK

The steering is locked, and all electrical
systems are off. The key can be re-
moved.

To lock the steering

1. Turn the handlebars all the way to

the left.

2. Push the key in from the “OFF”

position, and then turn it to
“LOCK” while still pushing it.

3. Remove the key.

To unlock the steering

Push the key in, and then turn it to
“OFF” while still pushing it.

WARNING

EWAU0042



Never turn the key to “OFF” or
“LOCK” while the vehicle is
movin

; otherwise, the electri-

cal systems will

e switche

off,

which may result in loss of con-
trol or an acci

ent.

OFF

LOCK

ZAUV0301

OFF

LOCK

ZAUV0302

UB15E1E0.book Page 1 Tuesday, July 18, 2017 10:42 AM

Summary of Contents for Exciter T150































































































Search results

Summary of Contents for Exciter T150

Reviews:

Related manuals for Exciter T150

Brands by name

Popular brands

Yamaha Exciter T150, Owner'S Manual

Search results

Summary of Contents for Exciter T150

Reviews:

Related manuals for Exciter T150

Brands by name

Popular brands