Yamaha EMX7, Manual

Page: 10 / 16

9
EMX7 / EMX5 / EMX2 General Specifications
MODEL EMX7 EMX5 EMX2
Output Power
1 kHz THD+N < 10% (CEA2006)
710 W + 710 W (4 Ω)
500 W + 500 W (8 Ω)
630 W + 630 W (4 Ω)
460 W + 460 W (8 Ω)
250 W + 250 W (4 Ω)
170 W + 170 W (8 Ω)
1 kHz THD+N < 1% (CEA2006)
600 W + 600 W (4 Ω)
400 W + 400 W (8 Ω)
500 W + 500 W (4 Ω)
370 W + 370 W (8 Ω)
110 W + 110 W (4 Ω)
110 W + 110 W (8 Ω)
Input to SPEAKERS
Input to STEREO OUT,
AUX1 SEND, AUX2 SEND
Input to SPEAKERS
Input to STEREO OUT,
AUX1 SEND, AUX2 SEND
Input to SPEAKERS Input to MONITOR OUT
Frequency Response
Refer to the nominal output level
@ 1 kHz
+1 dB/-3 dB
(40 Hz to 20 kHz)
+0.5 dB/-1 dB
(20 Hz to 20 kHz)
+1 dB/-3 dB
(40 Hz to 20 kHz)
+0.5 dB/-1 dB
(20 Hz to 20 kHz)
1 dB/-4 dB
(40 Hz to 20 kHz)
+0.5 dB/-1.5 dB
(20 Hz to 20 kHz)
Total Harmonic Distortion *1 (THD+N)
MIC/LINE =LINE (CH1–4)
0.1% @ 10 W
(40 Hz to 20 kHz)
0.04% @ 65 W (1 kHz)
MIC/LINE =LINE (CH1–4)
0.02% @ +14 dBu
(20 Hz to 20 kHz)
0.007% @ +20 dBu (1 kHz)
0.1% @ 10 W
(40 Hz to 20 kHz)
0.05% @ 50 W (1 kHz)
0.03% @ +14 dBu
(20 Hz to 20 kHz)
0.007% @ +20 dBu (1 kHz)
0.2% @ 13.8 W
(40 Hz to 20 kHz)
0.4% @ 23.2 W(1 kHz)
0.05% @ +10 dBu
(20 Hz to 20 kHz)
0.009% @ +20 dBu(1 kHz)
Hum & Noise *2
(20 Hz to 20 kHz)
Equivalent Input Noise -117 dBu -115 dBu
Residual Output Noise
-70 dBu
(40 Hz to 20 kHz,
STEREO MASTER LEVEL: min)
-82 dBu
(20 Hz to 20 kHz,
STEREO MASTER LEVEL: min)
-70 dBu
(40 Hz to 20 kHz,
STEREO MASTER LEVEL: min)
-82 dBu
(20 Hz to 20 kHz,
STEREO MASTER LEVEL: min)
-68 dBu
(40 Hz to 20 kHz, MASTER: min)
-99 dBu
(20 Hz to 20 kHz, MONITOR: min)
Crosstalk (1 kHz) *3 -85 dB -80 dB
Input Channels
TOTAL: 12 channels
Mono (MIC/LINE): 8, Stereo (LINE): 4
TOTAL: 10 channels
Mono (MIC/LINE): 4, Stereo (LINE): 3
Output Channels SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R] SPEAKERS [L, R], MONITOR OUT [L,R], SUBWOOFER OUT
Bus Stereo: 1, AUX: 2 (Including FX) Stereo: 1, Effect: 1
Input Channel Function
MIC/LINE (CH1–4): 30 dB PAD PAD (CH1-4): 26 dB
Hi-Z (CH4): Supported Hi-Z (CH4): Supported
HPF (CH1–3) 80 Hz, -12 dB/oct.
Equalizer (EQ):
HIGH: 8 kHz +15 dB / -15 dB
MID: 2.5 kHz +15 dB / -15 dB
LOW: 100 Hz +15 dB / -15 dB
Equalizer (EQ):
HIGH: 10 kHz +15 dB / -15 dB (Shelving)
MID: 2.5 kHz +15 dB / -15 dB (Peaking)
LOW: 100 Hz +15 dB / -15 dB (Shelving)
COMP (CH1–4): 1-knob COMP
Level Meter
2 × 12 points LED meter
(-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, PEAK)
2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK) 6 points (-20, -6, 0, +3, +6, LIMITER)
Built-in Effect SPX Algorithm 24 programs Reverb 4 programs
Output Channel Function Feedback suppressor, Graphic equalizer, Speaker processor Feedback suppressor, Master EQ, Monitor EQ Feedback suppressor, Master EQ (SPEECH to MUSIC)
Phantom Power Voltage +48 V CH1, 2: +30 V
Foot Switch Effect mute on/off Effect Mute on/off
Protection
Load Protection: DC-fault
Amplifier Protection: Over heat protection, Over current protection, Integral power protection
Power Supply Protection: Over heat protection, Over current protection
Load Protection: DC-fault
Amplifier Protection: Over heat protection, Over current protection
Power Supply Protection: Over heat protection, Over current protection
Power Requirements AC 100-240 V, 50 Hz/60 Hz
Power Consumption 45 W (Idle) / 250 W (1/8 Power) 42 W (Idle) / 210 W (1/8 Power) 35 W (Idle) / 90 W (1/8 Power)
Dimensions (W × H × D) 465 mm × 308 mm × 325 mm (18 5/16" × 12 1/8" × 12 13/16") 375 mm × 147 mm × 220 mm (14 3/4" x 5 13/16" x 8 11/16")
Net Weight 9.5 kg (20.9 lbs) 4.2 kg (9.3 lbs)
Optional Accessory Rack-mount brackets: RK-EMX7, Foot switch: FC5
Rack-Mount Kit: RK-EMX2, Mic Stand Adaptor: BMS-10A,
Foot Switch: FC5
Operating Temperature 0 to +40°C
*1 THD+N is measured with 22 kHz LPF *2 Noise is measured with A-weighting filter. *3 Crosstalk is measured with 1 kHz band pass filter.
0 dBu = 0.775 Vrms, Output impedance of signal generator (Rs) = 150 Ω All level controls are at their maximum position if not specified.
EMX7 / EMX5 / EMX2 Input Characteristics
EMX7 / EMX5
Input Jack MIC/LINE Hi-Z Actual Load Impedance For Use with Nominal
Input Level
Connector
Sensitivity *1
Nominal Level
( Position) *2
Max.
Before Clip
CH 1–4
XLR
MIC —
3 kΩ 50–600 Ω Mics
-60 dBu (0.775 mV) -43 dBu (5.48 mV) -15 dBu (138 mV)
Combo jack *3 (Balanced)
LINE — -30 dBu (24.5 mV) -13 dBu (173 mV) +15 dBu (4.36 V)
Phone
MIC —
8 kΩ 600 Ω Lines
-50 dBu (2.45 mV) -33 dBu (17.3 mV) -5 dBu (436 mV)
LINE — -20 dBu (77.5 mV) -3 dBu (548 mV) +25 dBu (13.8 V)
CH 4 (Hi-Z) Phone
MIC
ON 1 MΩ 10 kΩ Lines
-50 dBu (2.45 mV) -33 dBu (17.3 mV) -5 dBu (436 mV)
Phone jack *4 (Unbalanced)
LINE -20 dBu (77.5 mV) -3 dBu (548 mV) +20 dBu (7.75 V)
CH 5/6, 7/8
XLR
— —
3 kΩ 50–600 Ω Mics -60 dBu (0.775 mV) -43 dBu (5.48 mV) -15 dBu (138 mV) XLR-3-31 *5 (Balanced)
Phone 10 kΩ 600 Ω Lines -20 dBu (77.5 mV) -3 dBu (548 mV) +25 dBu (13.8 V) Phone jack *4 (Unbalanced)
CH 9/10, 11/12
XLR
— —
3 kΩ 50–600 Ω Mics -60 dBu (0.775 mV) -43 dBu (5.48 mV) -15 dBu (138 mV) XLR-3-31 *5 (Balanced)
Pin 10 kΩ 600 Ω Lines -8 dBu (316 mV) +10 dBu (2.45 V) +25 dBu (13.8 V) RCA pin (Unbalanced)
CH 11/12 Mini jack — — 10 kΩ 600 Ω Lines -8 dBu (316 mV) +10 dBu (2.45 V) +25 dBu (13.8 V) Stereo mini jack *6 (Unbalanced)
EMX2
Input Jack MIC/LINE Hi-Z [CH4] Actual Load Impedance For Use with Nominal
Input Level
Connector
Sensitivity *1 Nominal Max. Before Clip
CH1 - 4 [XLR]
MIC
— 3 kΩ 150 Ω Mics
-56 dBu (1.228 mV) -35 dBu (13.78 mV) -10 dBu (245.1 mV)
CH1, 2 XLR-3-31 *5 (Balanced)
CH3, 4 Combo jack *3 (Balanced)
LINE -30 dBu (24.51 mV) -9 dBu (275.0 mV) +16 dBu (4.890 V)
CH3, 4 [Phone]
MIC
OFF 3 kΩ 150 Ω Lines
-50 dBu (2.451 mV) -29 dBu (27.50 mV) -4 dBu (489.0 mV)
ON 1 MΩ 10 kΩ Lines
LINE
OFF 3 kΩ 150 Ω Lines
-24 dBu (48.90 mV) -3 dBu (548.7 mV) +22 dBu (9.757 V)
ON 1 MΩ 10 kΩ Lines
CH5/6 - 9/10 — — 10 kΩ 150 Ω Lines -24 dBu (48.90 mV) -3 dBu (548.7 mV) +22 dBu (9.757 V)
CH5/6 Phone jack *4 (Unbalanced)
CH7/8 Phone jack *4 & RCA pin (Unbalanced)
CH9/10 Phone jack *4 & Stereo mini jack (Unbalanced)
*1 Sensitivity is the lowest level that will produce an output of +4 dBu (1.228 V) or the nominal output level when the unit is set to maximum gain. (All level controls are at their maximum position.) *2 Level controls setting : Channel level controls are at their t position. Master level controls are at their maximum position.
*3 1&Sleeve = GND, 2&Tip = HOT, 3&Ring = COLD *4 Tip = Signal, Sleeve = GND *5 1 = GND, 2 = HOT, 3 = COLD *6 Tip = LEFT, Ring = RIGHT, Sleeve = GND
0 dBu = 0.775 Vrms
EMX7 / EMX5 / EMX2 Output Characteristics
EMX7 / EMX5 EMX2
Output Jack
Actual Source
Impedance
For Use with Nominal
Output level
Connector Output Jack
Actual Source
Impedance
For Use with Nominal
Output Level
Connector
Nominal Max. Before Clip Nominal Max. Before Clip
STEREO OUT L, R 600 Ω 10 kΩ Lines
+4 dBu
(1.228 V)
+20 dBu
(7.75 V)
Phone jack *1
(Impedance balanced)
MONITOR OUT [L, R] 150 Ω 10 kΩ Lines +4 dBu (1.23 V) +20 dBu (7.75 V)
Phone jack *1
(Impedance balanced)
AUX SEND 1, 2 600 Ω 10 kΩ Lines
+4 dBu
(1.228 V)
+20 dBu
(7.75 V)
Phone jack *1
(Impedance balanced)
SUBWOOFER OUT 150 Ω 10 kΩ Lines -3 dBu (0.55 V) +17 dBu (5.49 V)
Phone jack *1
(Impedance balanced)
REC OUT L, R 600 Ω 10 kΩ Lines
-10 dBV
(0.308 V)
+18 dBV
(7.75 V)
RCA pin (Unbalanced)
*1 Tip = HOT, Ring = COLD, Sleeve = GND
0 dBu = 0.775 Vrms 0 dBV = 1.00 Vrms
EMX7 / EMX5 / EMX2 Speaker Output Characteristics
EMX7 / EMX5 EMX2
Output Jack
Actual Source
Impedance
For Use with Nominal
Output level
Connector Output Jack
Actual Source
Impedance
For Use with Nominal
Output Level
Connector
1 kHz THD+N < 1% (CEA2006) 1 kHz THD+N < 10% (CEA2006) 1 kHz THD+N < 1% 1 kHz THD+N < 10% (CEA2006)
SPEAKERS A, B < 0.1 Ω
4 Ω Speakers 600 W 710 W
speakON NL4 *1
Phone jack *2
SPEAKERS [L, R] < 0.1 Ω
4 Ω Speakers 110 W 250 W
Phone jack *1
8 Ω Speakers 400 W 500 W 8 Ω Speakers 110 W 170 W
*1 1+ = Positive, 1- = Negative *2 Tip = Positive, Sleeve = Negative
0 dBu = 0.775 Vrms
*1 Tip = Positive, Sleeve = Negative