Controls and Connectors
24
EMX512SC/EMX312SC/EMX212S
MONITOR Section
K
Graphic Equalizer
This 7-band graphic equalizer adjusts the frequency
characteristics of the monitor signal that feeds to the
MONITOR OUT jack
O
and (if the POWER AMP
switch is down) to the SPEAKERS B jacks
V
. Each
band can be adjusted by ±12 dB. The base frequencies
for the bands are: 125, 250, 500, 1k, 2k, 4k, and 8k Hz.
L
EFFECT RETURN knob
Adjusts the level of the signal sent from the internal
effector to the MONITOR bus.
M
MASTER knob
Adjusts the level of the monitor signal send to the MON-
ITOR OUT jack
O
and (if the POWER AMP switch is
down) to the SPEAKERS B jacks
V
.
N
LEVEL meters
The L and R meters show the level of the signal output
from the MONITOR OUT jack
O
.
If the POWER AMP switch is down, the MONITOR
OUT signal also passes through the internal power amp
and is then output at SPEAKERS jacks B1 and B2
V
.
Keep an eye on the LIMITER lamps
Q
to ensure that
the level at the SPEAKERS jacks does not stay too
high.
O
MONITOR OUT jack
This unbalanced phone jack outputs the monaural moni-
tor signal. You would typically connect this jack to pow-
ered speakers used for monitoring. The signal sent to this
jack is adjusted by the MONITOR section’s MASTER
knob
M
and the settings of the MONITOR section’s
graphic equalizer
K
.
L
M
N
K
O
