5
Rhythm/Keyboard Percussion
ELS-01/01C Owner’s Manual
55
To use the Break patterns:
As you play the Electone along with the rhythm, occasionally press the [BREAK]
button.
Moreover, you can start/stop the rhythm and switch the sections by using the
Footswitch. See page 186 for details.
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Changing the rhythm volume
There are two ways to set the rhythm volume: using the VOLUME buttons on the
panel and using the volume slider in the display. The volume buttons let you make
coarse adjustments to the volume while the slider gives you fine control.
Using VOLUME buttons on the panel (coarse):
Press one of the VOLUME buttons of the rhythm on the panel to set the desired level.
The buttons have seven volume settings, from a minimum of 0, or no sound, to a
maximum of full volume.
Using VOLUME slider in the display (fine):
Pressing the same rhythm button on the panel again (or pressing the rhythm name of
the selected rhythm in the display) calls up the Rhythm Condition Display.
To set the volume, touch the PERCUSSION VOLUME slider in the display or use the
Data Control Dial. The control range is from 0 (no sound) to 24 (full volume).
BREAK
START
SYNCHRO
START
MARCH
LATIN
WORLD
MUSIC
BALLAD
ROCK
DANCE
WALTZ
POPS
R & B
SWING&
JAZZ
2
1
1
RHYTHM
VOLUME
SEQ.
2
SEQ.
3
SEQ.
4
SEQ.
MAX
MIN
DATA CONTROL
NOTE
Depending on the volume
value (set by the slider), two
adjacent VOLUME button
lamps may be lit at the same
time, indicating an
intermediate position.