46
4 Rhythm, Accompaniment and Percussion
About the User Rhythm Sequence:
The EL-27 can read the user rhythm sequence data created by the
other Electones such as EL-37 and play back the sequence data.
To read and play back the rhythm sequence data:
1.
Create the rhythm sequence data with the EL-37
and save them to a floppy disk as a part of the
registration data.
2.
Insert the floppy disk into the M.D.R. slot of the
EL-27. Call up the registration, to load the data onto
the SEQ.1-4 buttons of the EL-27.
3.
Press the appropriate SEQ. button.
4.
Press the START button to start playing back the
rhythm sequences.
About the SEQ.1-4 buttons:
Each SEQ. button is assigned with the following rhythm patterns as the
default.
SEQ.1
Metronome
SEQ.2
2/4 pattern
SEQ.3
3/4 pattern
SEQ.4
4/4 pattern
If you once read the external rhythm sequence data, the above settings
for each SEQ. button will be overwritten and lost. If you want to return
to the default setting, perform the Power On Reset operation described
on page 49.
SYNCHRO
START
START
RHYTHM
FILL IN
INTRO.
ENDING
MARCH
WALTZ
SWING
BOUNCE
SLOW
ROCK
MAX
MIN
TANGO
LATIN
1
LATIN
2
8 BEAT
16 BEAT
RHYTHM
1
2
SEQ.
SEQ.
1
3
SEQ.
SEQ.
2
4
MARCH
WALTZ
SWING
BOUNCE
SLOW
ROCK
MAX
MIN
TANGO
LATIN
1
LATIN
2
8 BEAT
16 BEAT
RHYTHM
1
2
SEQ.
SEQ.
1
3
SEQ.
SEQ.
2
4
If you have loaded the rhythm
sequence data to all four SEQ.
buttons and the SEQ. buttons are all
turned on, the EL-27 will play back the
sequences automatically from the
lowest numbered button in the
numerical order to the highest
numbered button.
When you turn off and turn
on the Electone again, the
voice is set to the Basic
Registration 1. Be sure to store the
selected voices (registration
setting) to the Registration Memory
before you turn off the Electone
(see page 47.).
