MENU
EAD10 Reference Manual (Advanced)
46
Job
Recorder
Export Audio : Export Audio
This saves the audio file recorded in the internal recorder to a USB flash drive.
1.
If you want to add a name to the file, press the “NAME” button ([F2]) and enter a name.
2.
Press the “EXPORT” button ([F3]) and the confirmation screen appears.
3.
Press the “YES” button ([F1]) to export.
Press the “NO” button ([F3]) to cancel the export and the screen returns to Step 1.
“Completed.” appears when the export is complete, and the screen returns to the Export screen.
Job/Recorder Recorder Settings
Settings Screen Structure
Procedure
Entering the File Name
1.
Use the [–] and [+] buttons to select a character, and then use the “<” and “>” buttons ([F1] and [F3]) to move
the cursor to the next character position. A file name of up to 16 characters can be assigned.
2.
When you are finished entering all characters, press the “OK” button ([F2]).
• Recording data will be lost when the power is turned off or when performing a factory reset.
• Audio data is not backed up in “All” files.
NOTE
