![background image](http://html.mh-extra.com/html/yamaha/dx200-editor/dx200-editor_owners-manual_903177078.webp)
78
Setup Menus /
Receive DX200 Bulk Dump Data
This is used for importing DX200 pattern data from a DX200 or DX7/DX7II. All current
settings will be replaced by the received data.
• Make sure the connection of the MIDI IN/OUT jacks of transmitting device and the OUTPUT/
INPUT of computer. (When the DX7 transmits to the computer, connect only MIDI OUT jack of
DX7 and the INPUT of computer. Also transmit data from the DX7 after starting the bulk
receiving on "Receive DX200 Bulk Dump" dialog.
• Refer to the "MIDI Data Format" in the DX200 Owner's Manual about the data compatibility
with transmitting device.
• Receive Method
1 (Pattern/Voice)
When this is selected, only the data for one pattern/voice will be received. This data is
loaded into the edit buffer (temporary memory storage).
• Make sure to store the received pattern/voice after executing this operation. Otherwise the
data will be lost upon selecting a different pattern/voice.
All User (Patterns/Voices)
When this is selected, the data for 128 User patterns/voices will be received.
Receive DX200 Bulk Dump Data