![background image](http://html.mh-extra.com/html/yamaha/dx200-editor/dx200-editor_owners-manual_903177035.webp)
35
Parameters /
DX200 Editor Main Window
• Pitch EG Rate 1 - 4
Range: 0 ... 99
These determine the amount of time that elapses between changes in the pitch (as set in
Level 1 - 4 below).
• Pitch EG Level 1 - 4
Range: 0 ... 99
These determine the overall pitch of the pattern at five points in time. A value of "50" cor-
responds to normal pitch, or no pitch change. Values under "50" lower the pitch, and val-
ues above "50" raise it. The actual pitch range here depends on the Pitch EG Range
parameter setting. (Higher Pitch EG Range settings result in greater pitch variation.)
The amount of time that elapses between these pitch change points is set in Rate 1 - 4
above.
In the Edit Panel window:
Click button [29] (PITCH EG RATE) repeatedly to call up Rate 1, 2, 3, and 4 in suc-
cession. (This includes the
parameter.) Likewise, click button
[30] (PITCH EG LEVEL) repeatedly to call up Level 1, 2, 3, and 4 in succession.
(This includes the Pitch EG Level Range parameter.) Use the DATA ENTRY controls
to set the value for each parameter.
• Pitch EG Range
Settings:
1/2v (six semitones)
1va (one octave)
2va (two octaves)
8va (eight octaves)
This determines the maximum range of pitch change with the Pitch EG. For example,
when this is set to "1va," the full range of the Pitch EG Level 1 - 4 parameters is one
octave (six semitones above and below the normal pitch value of "50"). The minimum
setting of "1/2v" lets you create subtle pitch changes, whereas the maximum setting of
"8va" is for extreme pitch variations.