27
DVR-700/NS-PSW700/NS-P700
D
VR-70
0/
NS-PSW70
0/NS-P70
0
Check to make sure that the serial port is open.
If “COM x opened!” is not displayed, it is possible that 232C port of the
PC has a problem.
The checksum of the ROM code is displayed in the frame of “mot sum:”
(to be used for confirmation after writing)
When the mot file is loaded
Writing to the Main Microprocessor
Connection
1. Connect the writing port of NS-PSW700 to the serial port (RS232C) of the PC with RS232C cross cable, RS232C
conversion adaptor and flexible flat cable. (See connection diagram 1)
2. Set the switch (SW301) of RS232C conversion adaptor to the “FLASH UCOM” side. (See connection diagram 1)
Operation procedures
1. Start up “DSP_FLASHER_v3.0.exe”.
“DSP FLASHER_V3.0” is displayed. (Fig. 1)
2. Select the firmware.
Click [...]. (Fig. 1)
Select “D700_xxxxx.mot”. (Fig. 1)
Fig. 1
3. Connect the power cable of the NS-PSW700 to the AC outlet.
Summary of Contents for DVX-700
Page 97: ...A B C D E F G H I J 1 2 3 4 5 6 7 DVR 700 NS PSW700 NS P700 97 SUB P C B Side B NS PSW700...
Page 120: ...120 DVR 700 NS PSW700 NS P700 DVR 700 NS PSW700 NS P700 SYSTEM MENU...
Page 121: ...121 DVR 700 NS PSW700 NS P700 DVR 700 NS PSW700 NS P700 MEMO...
Page 122: ...DVD CONTROLLER DVR 700 SUBWOOFER SYSTEM CONTROL NS PSW700 SPEAKERS NS P700...
