DVD-C940/DV-C6680
DVD-C940
/DV-C6680
19
SMA Error Codes
0008
SP_CONTINU
ITYERROR
Sequence of sectors coming
from disc is incorrect. Reason:
see SP_SYNCERROR
0009
DMX_CONTI
NUITYERRO
R
Sequence of sectors is incorrect.
Reason: problem with buffer
RAM
000A
LLD_ERROR
An illegal audio format was
offered to the decoder. Reason:
unknown audio type on disc or
problem with buffer RAM
000B
BCU_ERROR Internal problem in Furore chip
Error
Code
Error name
Explanation
Error
Number Error name
Explanation
0000
SMA_TIMEO
UTERROR
Data coming from disc not in
time. Reason: damaged disc or
engine problem.
6.2
Trade Mode
Figure 37
Note: To activate and deactivate the Trade Mode with the disc
in the player, the procedure is similar to above, except that the
remote control keys combination is pressed at the instant when
the local display is flashing “READING”
POWER ON
TO ACTIVATE TRADE MODE
<PLAY> <259> <PLAY>
DURING STOP MODE AND W/O DISC.
PRESS REMOTE KEYS COMBINATION
PLAYER IS IN TRADE MODE WHEN
PRESSING FRONT KEYS,
THE PLAYER DOESN'T RESPOND
POWER ON
TO DEACTIVATE TRADE MODE
<PLAY> <259> <PLAY>
DURING STOP MODE AND W/O DISC.
PRESS REMOTE KEYS COMBINATION
PLAYER IS IN NORMAL MODE WHEN
PRESSING FRONT KEYS,
THE PLAYER WILL RESPOND
When the player is in Trade Mode, the player cannot be
controlled by means of the front key buttons, but only by means
of the remote control.
●
Put the player in the stop mode with no disc loaded.
●
Press the following keys on the remote control:
<
PLAY
> followed by numerical keys <
2
> <
7
> <
4
>
The display shows: “--- --- --“
●
Now, successively press the following keys:
<
1
> <
1
> <
1
> <
0
> <
1
> <
8
> <
0
> <
6
>
●
Press<
PLAY
> again.
The TV screen will momentarily become BLUE to
confirm that the mono board has been reprogrammed;
then the set goes to the stop mode.
After reset of NV-memory or repair of the Mono board,
all of the customer settings and the region code will be
lost.
Reprogramming of the Mono board will install the default
factory settings and assigned region code.
Reprogramming is limited to 25 times.
When the counter reaches 25, reprogramming is no
longer possible.
Reprogramming is done by using the remote control.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
