9
English
Preparation
We recommend to setup some of the basic menu items
before the initial playback.
1
Press STANDBY/ON /I to turn on the unit.
2
Press ON SCREEN.
➜
On-screen menu is displayed on the screen.
3
Follow the procedure described below to set the
following menu items.
1
You can select the language displayed in the On-screen
menu.
1
Go to [Menu Language] (Setup
➔
Language
➔
Menu
Language) by using
v
w
t
u
buttons on the remote
control, then press
u
.
➜
Choices are displayed on the right column.
2
Select a language to be displayed in the On-screen menu
by using
v
w
buttons.
3
Press
t
to return to the previous menu.
2
You can select the audio language spoken in video discs.
Available choices are determined by the disc.
1
Go to [Default Audio] (Setup
➔
Language
➔
Default
Audio) by using
v
w
t
u
buttons on the remote control,
then press
u
.
➜
Choices are displayed on the right column.
2
Select a language by using
v
w
buttons.
3
Press
t
to return to the previous menu.
3
Default Sub-title (see page 14)
You can select the subtitle language set as default.
Available choices are determined by the disc.
1
Go to [Default Sub-title] (Setup
➔
Language
➔
Default
Sub-title) by using
v
w
t
u
buttons on the remote
control, then press
u
.
➜
Choices are displayed on the right column.
2
Select a default subtitle language by using
v
w
buttons.
3
Press
t
to return to the previous menu.
4
You can select the aspect ratio of the video displayed on
the TV monitor.
Select [Wide-screen] if you connect to a wide-screen
monitor. If you connect to a conventional monitor, select
[4:3 Pan Scan] (the left and right sides are trimmed when
you play 16:9 video) or [4:3 Letterbox] (black areas
appear at the top and bottom when you play 16:9 video).
1
Go to [TV Shape] (Setup
➔
TV
➔
TV shape) by using
v
w
t
u
buttons on the remote control, then press
u
.
➜
Choices are displayed on the right column.
2
Make a choice by using
v
w
buttons.
3
Press
t
to return to the previous menu.
5
Enables you to specify the type of analog output suitable
for your AV receiver. Select [Multichannel] if you are
using a multi-channel AV receiver with 6-ch discrete
inputs. If your AV receiver does not have 6-ch discrete
inputs, select one of [Stereo], [dolby Surr-compat], or
[3D Sound].
1
Go to [Analog output] (Setup
➔
Audio Menu
➔
Analog
output) by using
v
w
t
u
buttons on the remote
control, then press
u
.
➜
Choices are displayed on the right column.
2
Select an item for the analog output signal by using
v
w
buttons.
3
Press
t
to return to the previous menu.
6
Enables you to specify the type of digital output suitable
for your AV receiver. Select [PCM only] if your AV
receiver is not capable of decoding multi-channel audio.
Select [All] if you connected this unit’s digital out jacks to
a multi-channel AV receiver.
1
Go to [Digital output] (Setup
➔
Audio Menu
➔
Digital
output) by using
v
w
t
u
buttons on the remote
control, then press
u
.
➜
Choices are displayed on the right column.
2
Select an item for the digital output signal by using
v
w
buttons.
3
Press
t
to return to the previous menu.
Note:
– Press ON SCREEN again to exit from the On-screen
menu.
– You can find the selection of the helpful menu items in
[Preference] and [Setup].
Go to [Preference] if you want to customize this unit for
your personal requirement such as the Wake-up timer.
Go to [Setup] if you want to set the operational status of
this unit.
Setups before the initial
playback
ON SCREEN
