Yamaha DTX900, Data List

Page: 22 / 28

22
DTX900 Data List
[7]TECH MODULATION
No. Parameter Range
1 Mod Speed 0 − 127
2 Mod Depth 0 − 127
3 Mod Gain -12dB − +12dB
4 Mod Mix Balance D63>W − D=W − D<W63
5 Pre Mod HPF Cutoff Frequency 20Hz − 8.0kHz
6 Mod LPF Cutoff Frequency 1.0kHz − 20.0kHz
7 Mod LPF Resonance 1.0 − 12.0
8 Delay Time 0.1ms − 740.0ms
9 Delay Time Ofst R 0 − 884
10 Dry/Wet Balance D63>W − D=W − D<W63
11 Feedback Level -63 − +63
12 FB Level Ofst R -63 − +63
13 Feedback High Damp 0.1 − 1.0
14 FB Hi Damp Ofst R -0.9 − +0.9
15 —
16 —
Category - MISC
[1] TALKING MODULATOR
No. Parameter Range
1 Vowel a, i, u, e, o
2 Move Speed 1 − 62
3 Drive 0 − 127
4 Output Level 0 − 127
5 —
6 —
7 —
8 —
9 —
10 —
11 —
12 —
13 —
14 —
15 —
16 —
[2] PITCH CHANGE
No. Parameter Range
1 Pitch 1 -24 − +24
2 Fine 1 -50 − +50
3 Initial Delay 1 0.1ms − 400.0ms
4 Feedback Level 1 -63 − +63
5 Pitch 2 -24 − +24
6 Fine 2 -50 − +50
7 Initial Delay 2 0.1ms − 400.0ms
8 Feedback Level 2 -63 − +63
9 —
10 Dry/Wet Balance D63>W − D=W − D<W63
11 Pan 1 L63 − C − R63
12 Output Level1 0 − 127
13 Pan 2 L63 − C − R63
14 Output Level2 0 − 127
15 —
16 —
Master Effect Block
THRU type is not included in the Master Effect Block. If you wish to bypass this block, turn
the [UTILITY] - [EFFECT] - [MEF] Switch off.
COMPRESSOR
MULTI BAND COMP
LO-FI
COMP DISTORTION DELAY
DELAY L, R (STEREO)
RING MODULATOR
DYNAMIC FILTER
ISOLATOR
SLICE
Master EQ Block
[0] MEQ
No. Parameter Range
1 EQ1 Gain -12dB − +12dB
2 EQ1 Frequency 32Hz − 2.0kHz
3 EQ1 Q 0.1 − 12.0
4 EQ1 Shape shelving, peaking
5 EQ2 Gain -12dB − +12dB
6 EQ2 Frequency 100Hz − 10kHz
7 EQ2 Q 0.1 − 12.0
8 —
9 EQ3 Gain -12dB − +12dB
10 EQ3 Frequency 100Hz − 10kHz
11 EQ3 Q 0.1 − 12.0
12 —
13 EQ4 Gain -12dB − +12dB
14 EQ4 Frequency 100Hz − 10kHz
15 EQ4 Q 0.1 − 12.0
16 —
17 EQ5 Gain -12dB − +12dB
18 EQ5 Frequency 500Hz − 16kHz
19 EQ5 Q 0.1 − 12.0
20 EQ5 Shape shelving, peaking
When the EQ Shape1 is set to Peaking, the range EQ Frequency 1 is 63Hz - 2.0kHz(10 -
40).
Effect Parameter List