DTX700 Firmware Update Guide 3
Updating Procedure
NOTICE
Please save your important data onto the USB storage device before updating the firmware of the DTX700.
1.
After downloading, decompress the archived file, and then find the "***.PGM" file. Copy the
"***.PGM" file to the root of the USB storage device.
2.
Make sure to turn the power off (the Standby/On switch is set to the Standby position,) and then
connect the USB storage device to the [USB TO DEVICE] terminal on the side panel.
3.
Hold down the [REC] button, and then turn the power on by pressing the Standby/On switch.
4.
Press the [ENTER] button to start the update process. This process takes a few minutes.
5.
When the update process is completed, following message will appear. Check the version of the
firmware and you can turn the power off.
This completes the update process.
Completed.
Reboot DTX700.
Boot Ver : *.**
Firm Ver : *.**
