Yamaha DTX402K Owner'S Manual Download | Manualshive

Page: 6 / 72

background image

DTX402K DTX432K DTX452K Owner’s Manual

4

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

• This AC adaptor is designed for use with only Yamaha electronic

instruments. Do not use for any other purpose.

• Indoor use only. Do not use in any wet environments.

CAUTION

• When setting up, make sure that the AC outlet is easily accessible. If

some trouble or malfunction occurs, immediately turn off the power
switch of the instrument and disconnect the AC adaptor from the outlet.
When the AC adaptor is connected to the AC outlet, keep in mind that
electricity is flowing at the minimum level, even if the power switch is
turned off. When you are not using the instrument for a long time, make
sure to unplug the power cord from the wall AC outlet.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the
following:

• Do not place the power cord near heat sources such as heaters or

radiators. Also, do not excessively bend or otherwise damage the cord,
or place heavy objects on it.

• Only use the voltage specified as correct for the instrument. The

required voltage is printed on the name plate of the instrument.

• Use the specified adaptor (page 64) only. Using the wrong adaptor can

result in damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which

may have accumulated on it.

• Under no circumstances should any of the components of this product

be taken apart or customized. Doing so could result in electric shock,
fire, injury, or malfunction.

• Do not expose the instrument to rain, use it near water or in damp or

wet conditions, or place on it any containers (such as vases, bottles or
glasses) containing liquids which might spill into any openings. If any
liquid such as water seeps into the instrument, turn off the power
immediately and unplug the power cord from the AC outlet. Then have
the instrument inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning item

may fall over and cause a fire.

• When one of the following problems occur, immediately turn off the

power switch and disconnect the electric plug from the outlet. Then
have the device inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.

For AC adaptor

For Instrument

Power supply/AC adaptor

Assembly

Water warning

Fire warning

If you notice any abnormality

DMI-5

1/2

«
...
4
5
6
7
8
...
»

Summary of Contents for DTX402K









































































Reviews:

No comments

Related manuals for DTX402K

Brand: Yamaha Pages: 1

Brand: Yamaha Pages: 2

Brand: Yamaha Pages: 4

Brand: Yamaha Pages: 4

Brand: Yamaha Pages: 6

Brand: Yamaha Pages: 15

Brand: Yamaha Pages: 24

Brand: Yamaha Pages: 24

Brand: Yamaha Pages: 34

Brand: Yamaha Pages: 36

Brand: Yamaha Pages: 45

Brand: Tama Pages: 1

Brand: Yamaha Pages: 2

Brand: Vermona Pages: 24

Brand: First Act Pages: 4

Brand: Simmons Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands