Yamaha DTX-PRO Reference Manual Download Page 31

Page: 31 / 145

MENU Button

DTX-PRO DTX-PROX Reference Manual

Inst

MENU/Kit Edit/Inst

Screen

Parameter

Settings

Description

Category

Refer to the
Data List (PDF)

Specifies the Inst category.

With the DTX-PRO, the Inst can also be selected
by pressing the button below “INST” ([F1]) on the
KIT screen.

With the DTX-PROX, the Inst can also be selected
by setting the fader select knob to “INST”, and then
turning the LED rotary faders.

InstNumber

Refer to the
Data List (PDF)

Specifies the Inst number.

With the DTX-PRO, the Inst can also be selected
by pressing the button below “INST” ([F1]) on the
Kit screen.

With the DTX-PROX, the Inst can also be selected
by setting the fader select knob to “INST”, and then
turning the LED rotary faders.

Import Wav

Imports audio files.
When you press the button below “ENTER” ([F3]),
the IMPORT screen appears.

Different parameters will be
shown depending on the Inst
category.

Tuning

-12.00 – 0.00 –
+12.00

Adjusts the pitch in units of 25 cents. 0.01 corre-
sponds to 1 cent.

A “cent” is a unit of pitch defined as one hundredth of a
semitone. (100 cents = 1 semitone)

Size

-32 – 0 – +32

Simulates the effect of changing the cymbal size.

Muffling

0 – +16

Simulates the effect of changing the degree of muf-
fling (or how much the drum head is muted)

Sustain

-32 – 0

Determines the cymbal’s sustain time (i.e., how
quickly the sound decays to silence).

Clutch

-32 – 0 – +32

Simulates the effect of changing the hi-hat’s clutch
position. The smaller the setting, the quicker an
open hi-hat sound will decay to silence.

Hi-Hat Clutch setting is applied to all Kits.

Decay

-16 – 0

Determines how quickly the sound decays to
silence.

Pan

L64–C–R63

Sets the position in the stereo field (pan).

NOTE

Summary of Contents for DTX-PRO


















































































































































Search results

Summary of Contents for DTX-PRO

Reviews:

Related manuals for DTX-PRO

Brands by name

Popular brands

Yamaha DTX-PRO, Reference Manual

Search results

Summary of Contents for DTX-PRO

Reviews:

Related manuals for DTX-PRO

Brands by name

Popular brands