DTX-PRO Firmware Update Guide
4
Manual Development Group
©2020 Yamaha Corporation
Published 11/2020
YJ-A0
Troubleshooting
The power was turned off or the USB flash drive was removed before the installation
process could be completed.
You need to reinstall the program. Go back to the beginning of the procedure
and try installing again.
An error message appears, and you cannot install the firmware.
Please check that:
・
The USB flash drive is inserted correctly.
・
There is no dust or dirt on the USB terminal.
・
The installation program file is saved at the root of the USB flash drive.
・
The data in the USB flash drive or the USB flash drive itself is not corrupted.
・
You have the correct file for your drum module.
・
The same problem does not occur with a different USB flash drive.
Main enhancements
v1.00
➜
v1.01
・
Added the DTX502 series drum kits to the Trigger Setup Wizard.
・
Fine-adjusted the MENU/Trigger/Crosstalk settings. Since the settings are
slightly different from those of version 1.00, readjust the crosstalk settings
if necessary.
・
Added -6dB, -12dB, and 18dB to the MENU/Utility/Output Gain settings.
・
Added PA-HP to the MENU/Utility/Input Output/AUX In/Input Mode settings.
・
Added AUX In Gain to the MENU/Utility/Input Output settings.
・
Changed setting ranges for some parameters.
・
Updated the displays on some screens.
・
Fixed minor problems.
