Yamaha DSP-A990 Operation Manual Download Page 17 | Manualshive

Page: 17 / 50

background image

15

English

CONNECTING TO S VIDEO JACKS

If your video cassette recorder, video disc player, etc. and your

monitor are equipped with “S” (high-resolution) video terminals,
connect them to this unit’s S VIDEO jacks, and connect this unit’s
S VIDEO MONITOR OUT jack to the “S” video input of your monitor.
Otherwise, connect the composite video jacks from your video
cassette recorder, video disc player, etc. to the VIDEO jacks of this
unit, and connect this unit’s VIDEO MONITOR OUT jack to the
composite video input of your monitor.

NOTE: If video signals are sent to both S VIDEO input and VIDEO
input jacks, the signals will be sent to their respective output jacks
independently.

NOTE: If your unit is the General Model, be sure the NTSC/PAL
switch has been correctly set to the standard that your video
equipment employs. Singapore model has no switch and uses the
NTSC standard, while other models without a switch use the PAL
standard.

Notes about the Video superimpose

●

If you watch a video source that is connected to both S VIDEO and
VIDEO input jacks of this unit, signals of screen display information
are output from only the S VIDEO MONITOR OUT jack.

●

When no video signal is input to either S VIDEO or VIDEO input
jacks of this unit, signals of screen display information are output
from both S VIDEO MONITOR OUT and VIDEO MONITOR OUT
jacks with a color background.
* For the General Model, if the NTSC/PAL switch on the rear panel

is set to “PAL”, nothing will be output from either S VIDEO
MONITOR OUT or VIDEO MONITOR OUT jack in this case.

TV/DBS

S-VIDEO
OUT

VIDEO OUT

VIDEO
OUT

S-VIDEO OUT

VIDEO IN

S-VIDEO IN

S-VIDEO IN

VIDEO IN

VIDEO IN

S-VIDEO IN

VIDEO OUT

S-VIDEO OUT

S-VIDEO
OUT

VIDEO
OUT

Monitor TV

TV/Satellite tuner

Video cassette recorder 1

Video disc player

Video cassette recorder 2

«
...
15
16
17
18
19
...
»

Summary of Contents for DSP-A990



















































Reviews:

No comments

Related manuals for DSP-A990

Brand: QUAD Pages: 17

Brand: NAD Pages: 39

Brand: Maintronic Pages: 4

Brand: QUAD Pages: 4

Brand: QSC Pages: 142

SERVOSTAR 600 Series

Brand: Kollmorgen Seidel Pages: 68

Brand: Analog Devices Pages: 20

Brand: Com-Power Pages: 15

Brand: RE Audio Pages: 12

Brand: PrimaLuna Pages: 8

Brand: Inter-m Pages: 32

FUSION SIGNATURE Series

Brand: Garmin Pages: 18

Brand: Optimus Pages: 23

TubeBooster 3000

Brand: X4-TECH Pages: 16

The Spell Booster

Brand: Olsson Pages: 12

ADVANCED NATIVE TECHNOLOGIES BBA 240

Brand: AEB Pages: 37

TABU AT INTEGRATED AMPLIFIER

Brand: Gryphon Pages: 6

Brand: GLX Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands