OTHER IMPORTANT SETTINGS AND ADJUSTMENTS
The following seven types of settings and adjustments should be
done before enjoying audio and video sources. Note that these
settings and adjustments cannot be done without monitoring the
display information (or the information displayed on the monitor
screen).
1. CENTER MODE
2. CENTER GEQ
3. LOW FREQ. TEST
4. PARAMETER INIT
5. MEMORY GUARD
6. VCR3 VIDEO OUT
7. INPUT LVL TRIM
SETTING/ADJUSTMENT PROCEDURE
As described on page 9, you can perform these settings and
adjustments watching the information displayed on the monitor
screen (or superimposed over the video image). So, to use this
function, first turn the monitor on.
1. Set the PARAMETER/SET MENU switch to the SET/MENU
position on the remote control unit.
2. Select an item (title) of setting/adjustment.
3. Select any desired mode or edit parameters on the item.
In the same way, perform settings/adjustments for other items.
NOTE: Setting conditions will be confirmed by using the INPUT
TRIM control and the SET MENU switch on the front panel. Items
No. 1 – 7 (except No. 4) are called by pressing the SET MENU
switch and the settings can be changed by the INPUT TRIM control.
It is recommended to use the remote control for this operation.
25
PARAMETER
SET MENU
Remote control
ON SCREEN
CENTER
LEVEL
PARAMETER
EFFECT
RESET
CLEAR
ON/OFF
REAR
LEVEL
MUTING
SET MENU
TV
THEATER
MOVIE
THEATER 1
MOVIE
THEATER 2
PRO LOGIC
MASTER
VOLUME
9
10
11
12
ON SCREEN
CENTER
LEVEL
PARAMETER
EFFECT
RESET
CLEAR
ON/OFF
REAR
LEVEL
MUTING
SET MENU
TV
THEATER
MOVIE
THEATER 1
MOVIE
THEATER 2
PRO LOGIC
MASTER
VOLUME
9
10
11
12
