DS60-112
7
B.
Amplifier Unit
6.
MAIN circuit board 1/4
6-1.
Remove the amplifier unit (See Item 4 above.)
6-2.
Remove the four (4) screws marked [30], four (4) knobs
of Rotary variable resisters, four (4) hexagonal nuts
and one (1) each of INPUT and SLAVE OUT hexagonal
nuts. The MAIN circuit board 1/4 can then be removed.
(Fig. 3)
7.
MAIN Circuit Boards 2/4, 3/4, 4/4
7-1.
Remove the amplifier unit. (See Item 4 above.)
7-2.
Remove the one (1) screw marked [210] from each
circuit board, which can then be removed. (Fig. 3)
8.
Power Transformer
8-1.
Remove the amplifier unit. (See Item 4 above.)
8-2.
Remove the four (4) screws marked [190A]. The
power transformer can then be removed. (Fig. 3)
9.
Heat Sink
9-1.
Remove the amplifier unit. (See Item 4 above.)
9-2.
Remove MAIN circuit boards 2/4, 3/4 and 4/4.
(See Item 7 above)
9-3.
Remove the three (3) screws marked [190B]. The
heat sink can then be removed. (Fig. 3)
Fig.3
[30]: Bind Head Tapping Screw-B 3.0X8 MFZN2BL (EP600190)
[190]: Bind Head Tapping Screw-C 4.0X8 MFZN2BL (VC688900)
[210]: Bind Head Screw SP3.0X12 MFZN2Y (VB763800)
IC BLOCK DIAGRAM
RC4558D-V (IG001390)
IC1, IC2
OP AMP
1
2
3
4
-V
+V
8
7
6
5
Output A
Non-Inverting
Input A
-DC Voltage Supply
+DC Voltage
Supply
Output B
Inverting
Input B
Non-Inverting
Input B
Inverting
Input A
+
-
+
-
[190B]
[30]
[30]
[30]
[190A]
[190A]
[30]
[190B]
[190B]
[190A]
[210]
[210]
[210]
Hexagonal nut
INPUT
SLAVE OUT
Knob
Hexagonal nut
1/4
MAIN
2/4
MAIN
3/4
MAIN
4/4
MAIN
