PERIODIC MAINTENANCE AND MINOR REPAIR
6-28
6
EAU04210*
Replacing the fuses
The main fuse is located under the igni-
tor unit panel.
The fuse box, which contains the fuses
for the individual circuits, is located in-
side the storage compartment. (See
page 3-14 for storage compartment
cover removal and installation proce-
dures.)
If a fuse is blown, replace it as follows.
NOTE:
_
Include steps 1–3 and 9–10 only for the
main fuse.
_
1. Remove the rider seat. (See page
3-11 [XVS1100] or 3-13
[XVS1100A] for rider seat removal
and installation procedures.)
2. Remove the quick fasteners
shown by pushing the center in
with a screwdriver, then pulling the
fastener out.
3. Pull the ignitor unit panel outward
to the right.
4. Turn the key to “OFF” and turn off
the electrical circuit in question.
5. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
1. Fuse box
2. Backup fuse (odometer)
3. Ignition fuse
4. Headlight fuse
5. Carburetor heater fuse
6. Spare fuse (
×
3)
7. Signaling system fuse
1. Quick fastener (
×
3)
1. Ignitor unit panel
2. Spare main fuse
3. Main fuse
Specified fuses:
Main fuse:
30 A
Backup fuse (odometer):
5 A
Ignition fuse:
10 A
Headlight fuse:
15 A
Carburetor heater fuse:
15 A
Signaling system fuse:
10 A
E_5pb.book Page 28 Friday, June 15, 2001 4:46 PM
Summary of Contents for DragStar XVS1100A
