11
◆
Connecting to a video player, etc.
1. Connect one end (yellow) of a commercially available video
cable to the VIDEO terminal of this projector.
2. Connect the other end (yellow) of the video cable to the
VIDEO terminal of the video equipment.
When the video equipment is equipped with the
S-video terminal, make the connection as follows.
1. Connect one end of the supplied S-video cable to the
S-VIDEO terminal of this projector.
2. Connect the other end of the S-video cable to the S-VIDEO
terminal of the video equipment.
• Read the instruction manual of the equipment to be connected.
• Contact your dealer for details of connection.
When a TV tuner or VCR is connected:
When you use this projector with a TV tuner or VCR connected, no image may appear or a No Signal message may appear on the screen when
you change to a channel that is not being received. In this case, set the channels of the TV tuner or VCR again. To avoid this problem, use the
TV tuner or VCR with its channel skip function enabled. (Only channels that are being received will be displayed.)
◆
Connecting to a DVD player
To connect this projector to video equipment that has component video output terminals, such as a DVD player, use the COMPONENT
terminals.
• Images may not be projected correctly depending on the type of DVD player you use.
• It may take some time before an image is displayed on the screen, depending on the type of the input signal; this is not a malfunction.
1
2
Video player, or the like
To
VIDEO
terminal
Video cable
(commercially available)
To VIDEO
terminal
1
2
Video player, or the like
S-VIDEO cable
To S-VIDEO
terminal
To S-VIDEO
terminal
Component cable
(commercially available)
DVD player
P
R
/C
R
(Red)
P
B
/C
B
(Blue)
Y
(Green)
P
B
/C
B
(Blue)
P
R
/C
R
(Red)
Y (Green)