Yamaha DME24N Owner'S Manual Download Page 37

Page: 37 / 482

Chapter 2

DME Designer Overview

DME Designer Owner’s Manual

DME Data Export

This exports parameters from a DME or SP2060 included in the current configuration and saves them
as a file.

Activates the DME or SP2060 configuration layout to be exported.

If multiple configurations are available, the DME or SP2060 configuration layout to be exported can
be selected via the Navigator window.

Click the [File] menu in the Main Panel window, and move the mouse cursor over [Export
Device Configuration].

A submenu will be displayed. The DME groups and SP groups included in the current configuration
will be displayed on a submenu.

On the submenu, click on the DME or SP2060 from which you will export settings.

The “Save As” dialog box will be displayed.

Enter the filename.

Determines whether a selected file type will be exported along with a wave file.

Specify the folder where the file will be saved, then click the [Save] button.

NOTE

Library data is not contained in the DME data files exported from SP2060.
Refer to “SP2060 Library Manager” on

page 133

Summary of Contents for DME24N



































































































































































































































































































































































































































































































Search results

Summary of Contents for DME24N

Reviews:

Related manuals for DME24N

Brands by name

Popular brands

Yamaha DME24N, Owner'S Manual

Search results

Summary of Contents for DME24N

Reviews:

Related manuals for DME24N

Brands by name

Popular brands