DME Setup Manual
18
When controlling the DME from your
computer via Ethernet, the DME does not
operate correctly.
• Is the Ethernet cable connected correctly?
• Is the DME-N Network Driver set up appropriately?
Did you enter an appropriate IP address?
• Is the computer network setup appropriate?
Select [Start]
→
[Control Panel]
→
[Network Connections]
→
[Local Area Connection], and confirm the network
setup.
• Are the settings of DME and peripheral network
devices (including switching hubs) appropriate?
Refer to the relevant owner’s manuals for the DME and
peripheral network devices (including switching hubs) for
details.
• Have you selected an appropriate network port in the
DME Designer?
• Are you using the latest DME-N Network Driver
supporting DME?
The latest driver supporting DME can be downloaded from
the Yamaha website.
http://www.yamahaproaudio.com/
• Do you have security software running on your
system?
Try to disable the security software once. Set it to allow use
of TCP port 12300 on the network card being used by the
DME-N Network Driver.
Cannot suspend or resume the computer
correctly.
• Do not suspend the computer while the DME
Designer is running.
If you are using Windows 2000, you may not be able to
suspend/resume normally, depending on the particular
environment (USB Host Controller, etc.). (Even so, simply
disconnecting and connecting the USB cable will allow
you to use the DME functions again.)
To install one of either the DME Designer
software or DME-N Network Driver:
The software or driver can be individually installed by
double-clicking the “Setup.exe” file located in the
downloaded and extracted “Installer\DMEDesigner_”
or “Installer\Networkdrv_” folder.
To uninstall the DME Designer software:
The DME Designer software can be uninstalled either
via [Start]
→
[Control Panel]
→
[Add or Remove
Programs], or via [Start]
→
[Program Files]
→
[YAMAHA OPT Tools]
→
[DME Designer]
→
[Uninstall].
To uninstall the DME-N Network Driver:
The DME-N Network Driver can be uninstalled via
[Start]
→
[Control Panel]
→
[Add or Remove
Programs].
To uninstall the USB-MIDI Driver:
The USB-MIDI Driver can be uninstalled by double-
clicking the “uninstall.exe” file located in the
downloaded and decompressed “Uninstall” folder.
