MKIV / Pro Installation manual
5 - 5. Preparing the Tablet Controller
5. MKIV/Pro installation manual
1) Set up the cradle.
2) Put the rechargeable battery into the
Tablet Controller.
Tip:
Before removing the
battery, move the bat
tery lock to the direction
of an arrow.
3) Open the cover of the cradle
interface, and then set the Tab
let Controller on the cradle.
Charging starts and the charge
lamp lights in orange.
Adjusting the angle of the
cradle to your preference
Loosen the two screws on the
bottom of the base plate, adjust
the angle, and then tighten
the screws.
Battery charge takes 4 hours
HINT!
North American model only
MHB23 MKIV/PRO DIOV1.05, SCV.1.01 PAGE.09
