background image

3

PRECAUTIONS

PLEASE READ CAREFULLY 
BEFORE PROCEEDING

Please keep this man

u

al in a safe place for 

f

u

t

u

re reference.

 WARNING

Always follow the basic precautions listed below to 
avoid the possibility of serious injury or even death from 
electrical shock, short-circuiting, damages, fire or other 
hazards. These precautions include, but are not limited 
to, the following:

If you notice any abnormality

• If any of the following problems occur, immediately turn off 

the power switch and disconnect the electric plug from the 
outlet.
- The power cord or plug becomes frayed or damaged.
- Unusual smells or smoke are emitted.
- Some object, or water has been dropped into the product.
- There is a sudden loss of sound during use of the product.
- Cracks or other visible damage appear on the product.
Then have the product inspected or repaired by qualified 
Yamaha service personnel.

Power supply

• Do not place the power cord near heat sources such as 

heaters or radiators, and do not excessively bend or 
otherwise damage the cord, place heavy objects on it, or 
place it in a position where anyone could walk on, trip over, or 
roll anything over it.

• Only use the voltage specified as correct for the product. The 

required voltage is printed on the name plate of the product.

• Use only the supplied power cord.

If you intend to use the product in an area other than in the 
one you purchased, the included power cord may not be 
compatible. Please check with your Yamaha dealer.

• Check the electric plug periodically and remove any dirt or 

dust which may have accumulated on it.

• Make sure to fully insert the electric plug to prevent electric 

shocks or fire.

• When setting up the product, make sure that the AC outlet 

you are using is easily accessible. If some trouble or 
malfunction occurs, immediately turn off the power switch 
and disconnect the plug from the outlet. Even when the 
power switch is turned off, as long as the power cord is not 
unplugged from the wall AC outlet, the product will not be 
disconnected from the power source.

• Remove the electric plug from the outlet when the product is 

not to be used for extended periods of time.

• Do not touch the product or the electric plug during an 

electrical storm.

• Be sure to connect to an appropriate outlet with a protective 

grounding connection. Improper grounding can result in 
electrical shock, fire, or damage.

Do not open

• This product contains no user-serviceable parts. Do not 

attempt to disassemble the internal parts or modify them in 
any way.

Water warning

• Do not expose the product to rain, use it near water or in 

damp or wet conditions, or place on it any containers (such 
as vases, bottles or glasses) containing liquids which might 
spill into any openings.

• Never insert or remove an electric plug with wet hands.

Fire warning

• Do not place any burning items or open flames near the 

product, since they may cause a fire.

Hearing loss

• Before turning the power of all devices on or off, make sure 

that all volume levels are set to the minimum. Failing to do so 
may result in hearing loss, electric shock, or device damage.

• When turning on the AC power in your audio system, always 

turn on the product LAST, to avoid hearing loss and speaker 
damage. When turning the power off, the product should be 
turned off FIRST for the same reason.

 CAUTION

Always follow the basic precautions listed below to 
avoid the possibility of physical injury to you or others. 
These precautions include, but are not limited to, the 
following:

Power supply

• When removing the electric plug from the product or an 

outlet, always hold the plug itself and not the cord. Pulling by 
the cord can damage it.

Location and connection

• Do not place the product in an unstable position or a location 

with excessive vibration, where it might accidentally fall over 
and cause injury.

• Keep this product out of reach of children. This product is not 

suitable for use in locations where children are likely to be 
present.

• Do not block the vents. This product has ventilation holes at 

the rear to prevent the internal temperature from becoming 
too high. In particular, do not place the product on its side or 
upside down. Inadequate ventilation can result in 
overheating, possibly causing damage to the product(s), or 
even fire.

• To ensure proper heat dissipation of the product, when 

installing it:
- Do not cover it with any cloth.
- Do not use the product in a confined, poorly-ventilated 

location.

Inadequate ventilation can result in overheating, possibly 
causing damage to the product(s), or even fire. Make sure 
that there is adequate space from the rear: at least 30 cm 
above, 30 cm at the sides and 30 cm behind.

PA_en_12  1/2

Summary of Contents for DHR Series

























Reviews: