Yamaha CX-A5200BL Page 137 Owner'S Manual Download

Page: 137 / 179

137

■

MAC Address Filter

Sets the MAC address filter to limit access to the unit from other network devices.

Filter

Enables/disables the MAC address filter.

Settings

AirPlay (p.97) and DMC (p.137) operations are not subject to the MAC address filter.

MAC Address 1-10

Specifies the MAC addresses (up to 10) of the network devices that will be permitted access to

the unit when “Filter” is set to “On”.

■

Procedure

Use the cursor keys to select an MAC address number and press ENTER.

Use the cursor keys to move the edit position and to select a value.

To confirm the setting, press ENTER.

To exit from the menu, press SETUP.

■

DMC Control

Selects whether to allow a Digital Media Controller (DMC) to control playback. A Digital Media

Controller (DMC) is a device that can control other network devices through the network. When

this function is enabled, you can control playback of the unit from DMCs (such as Windows

Media Player 12) on the same network.

Input source

SERVER

Settings

■

AirPlay Volume Interlock

Enables/disables volume control from iTunes/iPhone via AirPlay. When other than “Off” is set,

you can adjust the unit’s volume from the iTunes/iPhone during playback.

Interlock

Settings

Off

Disables the MAC address filter.

Enables the MAC address filter. In “MAC Address 1-10”, specify the MAC addresses
of the network devices that will be permitted access to the unit.

Disable

Does not allow DMCs to control playback.

Enable

Allows DMCs to control playback.

Off

Disables volume control from iTunes/iPhone

Limited

Enables volume control from iTunes/iPhone within the limited range

(-80 dB to -20 dB and mute).

Full

Enables volume control from iTunes/iPhone in the full range

(-80 dB to +16.5 dB and mute).

Summary of Contents for CX-A5200BL




















































































































































































Search results

Summary of Contents for CX-A5200BL

Reviews:

Related manuals for CX-A5200BL

Brands by name

Popular brands

Yamaha CX-A5200BL, Owner'S Manual

Search results

Summary of Contents for CX-A5200BL

Reviews:

Related manuals for CX-A5200BL

Brands by name

Popular brands