104
CVP-701 Reference Manual
Utilit
y / S
y
st
em – Mak
ing Global Set
tings
–
12
Call up the operation display.
[FUNCTION]
→
TAB [
L
][
R
] MENU1
→
[J] UTILITY
→
TAB [
L
][
R
] PARAMETER LOCK
This function is used to “lock” specific parameters (effect, split point, etc.) to make them selectable only via
the panel control — in other words, instead of being changed via Registration Memory, One Touch Setting,
Music Finder, or Song and sequence data. Use the [3
] – [6
] buttons to select the desired parameter,
then enter or remove the checkmark by using the [7
]/[8
] (mark on) and [7
]/[8
] (mark off) buttons.
You can set or execute important USB media-related operations for the instrument.
Call up the operation display.
[FUNCTION]
→
TAB [
L
][
R
] MENU1
→
[J] UTILITY
→
TAB [
L
][
R
] USB
PARAMETER LOCK
USB
[A]/[B]
DRIVE LIST
Selects the desired USB flash drive for checking the remaining memory
of (see “PROPERTY” below) or for formatting (see the Owner’s Man-
ual).
[F]
PROPERTY
Opens the Property display of the USB flash drive selected by [A]/[B]
buttons, from which you can check the amount of remaining memory.
NOTE
The displayed remaining memory value is an approximate value.
