Chapter 1 - System Configuration
3
Chapter 1 - System Configuration
Before using the CRW4416S, make sure that you have all of the items
on the list of included items.
In order to use the CRW4416S, you will require the following.
Computer
The following operating environment is required:
• An IBM/AT compatible computer with a 100 MHz or faster Pentium
CPU (in order to write at 4x speed)
• A vacant slot in which to install a SCSI card or a pre-installed SCSI
card
• A vacant half-height bay
• Windows 95, Windows 98 or Windows NT4.0(Service Pack 3)
• Sufficient hard disk space
Note:
If you wish to create an image file and write it to a CD-R or CD-RW,
you will need approximately 750 MB of free space on your hard disk as
work area.
SCSI card
This is required in order to connect a SCSI device (the Yamaha
CRW4416S) to your computer.
We recommend the following :
Adaptec SCSI cards: AHA-2940 (PCI), AHA-154x (ISA)
Software
Use writing software or packet writing software which supports the
CRW4416S.
For software-related questions, please read the owner’s manual for your
software.
