6. INSTALLING SOFTWARE
6.1. Operating System recognizes the 3-in-1 CD-RW Drive
1. Reconnect your monitor, mouse, keyboard and AC power cord to your PC.
2. Turn your computer on by flipping the switch to the ON position. Look for the LED light
located on the front panel of the CD-RW drive to lit up.
3. Your computer should now boot-up normally. Wait for Windows 95/98 to load
in its usual way.
4. Double click on the "My Computer" Icon. When My Computer window appears,
your new CD-RW drive should be identified with a new CD drive icon.
5. Insert the supplied Yamaha/Adaptec CD-ROM disc in the CD-RW tray and verify that
your CD-RW drive is reading the disc correctly.
6. You are now ready to install the bundled software.
6.2. Adaptec DirectCD
To install Adaptec DirectCD, please follow the instructions below:
1. While running Windows 95/98/ME, Insert the Yamaha/Adaptec CD-ROM into your new
CD-RW drive or another connected CD-ROM drive.
2. The disk is designed to auto-run and you only need to follow screen prompts to install
the program.
If it does not
auto-run, then follow steps 3 through 9 for full installation.
3. Double click the
My Computer
icon or
Windows Explorer
.
4. Double click the appropriate drive icon or letter to explore contents of the CD.
5. Locate the
Read me
files in the directory
DirectCD
.
6. On the Windows Taskbar, click
Start
, then
Run
. Browse to and open
Direct CD
and double click on
Setup
. Verify that the
Run
dialog box reads
[Drive Letter]:\DirectCD\Setup.exe
and click
OK
.
34
