CVP-609/605 Reference Manual
71
Voice Settings
Lets you adjust the pitch related parameters for each keyboard part.
Lets you set the Piano related parameters which are available only for some of the piano Voices in the “Piano” category
(listed in the “Target Voice List” on
).
Tune
Tuning
Determines the pitch of each keyboard part.
Octave
Determines the range of the pitch change in octaves, over two octaves up or down for each keyboard
part.
Pitch Bend
Range
Determines the range of the Pitch Bend for each keyboard part in semitones when the “Pitch Bend”
or “Glide” function is assigned to a pedal (
).
Portamento
Time
Portamento is a function that creates a smooth transition in pitch from the first note played on the
keyboard to the next. The Portamento Time determines the pitch transition time. Higher values
result in a longer pitch change time. Setting this to “0” results in no effect. This parameter is available
for the keyboard part which is set to “Mono” (
).
Piano
Tuning Curve
Determines the tuning curve. Select “Flat” if you feel the tuning curve of the piano Voice does
not quite match that of other instruments Voices.
• Stretch:
Tuning curve particularly for pianos.
• Flat:
Tuning curve in which the frequency is octave doubled over the entire keyboard range.
Key Off Sampling
Adjusts the volume of the key-off sound (the subtle sound that occurs when you release a key).
Sustain Sampling
Adjusts the depth of sustain sampling for the damper pedal.
String Resonance
Adjusts the depth of string resonance.
