CVP-609/605 Owner’s Manual
78
Reg
ist
ra
tion
M
emo
ry
–
S
av
in
g and
Reca
llin
g C
u
st
om
P
ane
l S
etups
–
Registration Memory
– Saving and Recalling Custom Panel Setups –
The Registration Memory function allows you to save (or “register”) virtually all panel settings to a Registration
Memory button, and then instantly recall your custom panel settings by simply pressing a single button. The registered
settings for eight Registration Memory buttons should be saved as a single Bank (file).
1
Set up the panel controls (such as Voice, Style and so on) as desired.
Refer to the separate Data List for a list of parameters that can be registered with
the Registration Memory function.
2
Press the [MEMORY] button in the REGISTRATION MEMORY
section to call up the Registration Memory window.
3
Press one of the REGISTRATION MEMORY [1] – [8] buttons to which
you wish to memorize the panel setup.
The memorized button becomes red, indicating that the number button contains
data and its number is selected.
4
Register various panel setups to other buttons by repeating steps 1 – 3.
The registered panel setups can be recalled by simply pressing the desired number
button.
Registering Your Panel Setups
Selecting the items to be registered
Touching [
] at the bottom left of the window calls up the list for selecting the items to be
registered. Before going on to step 3, enter or remove checkmarks by touching the desired
items. Items having checkmarks will be registered.
Displays or hides the list of items
NOTICE
If you select the button
whose lamp is lit in red or
green here, the panel setup
previously memorized to the
button will be erased and
replaced by the new settings.
Hence, you should memorize
panel setups only to buttons
that are turned off.
About the lamp status
•
Red:
Data registered and currently selected
•
Green:
Data registered but not currently selected
•
Off:
No data registered
NOTE
• The panel setups registered
to the numbered buttons
are preserved even when
you turn off the power. If you
want to delete all eight
current panel setups, turn
the power on while holding
the B6 key (right-most B key
on the keyboard).
• You can also disable recall
of specific item(s) when
calling up the registered
panel setups: [Menu]
[RegistFreeze].
Summary of Contents for Clavinova CVP-609
Page 115: ...CVP 609 605 Owner s Manual 115...
