A+
Astronaut Modular
is a eurorack version of the Astronaut III space
reverb. Astronaut III has gained a worldwide following as a
multifunctional reverb pedal for guitar and bass. Now, it has been
adapted to eurorack modular systems: we have reworked the form
factor, retained all the original features, and added CV control over
certain parameters. The whole sonic palette of the Astronaut III (ranging
from traditional reverb patches to complex acoustic structures and
arpeggios) is available in the Astronaut Modular. The module has 22
algorithms along with the Hold (infinite sustain) mode. The Astronaut
Modular is a true inspiration machine!
Controls
1. The
VOLUME
knob controls the MIX OUT volume (with an option to
boost the signal).
2. The
MIX
knob controls the ratio between the wet and dry signals at
MIX OUT.
3. The
PROGRAM
knob selects algorithms within a bank.
4. The
BANK
button switches between the two banks.
5. The
DECAY
knob controls the size and spatial/acoustic parameters of
the selected algorithm. It controls reverb decay length as well as
feedback in certain algorithms (read more in the “List of Algorithms”
section).
6. The
CHARACTER
knob controls an extra parameter of the selected
algorithm (read more in the “List of Algorithms” section).
7. The
HOLD
button activates Hold Mode (infinite sustain) when pressed
and held.
Connections
• IN
is a mono input for the incoming signal.
• MIX OUT
is a mono output for the dry/wet mix (the ratio is controlled
by the MIX knob).
• WET OUT
is a mono output for the wet signal only.
• CHARACTER CV
is an input for CV control over the CHARACTER knob
(10Vptp).
• HOLD CV
is an input for CV control over the HOLD button. The effect
is the same as holding the button. The input is set to a +2V threshold.
• DECAY CV
is an input for CV control over the DECAY knob (10Vptp).
In case of CV control, the DECAY and CHARACTER knobs set the middle
point of their respective parameters and the control voltage shifts that
point within a ±5V range. When the DECAY and/or CHARACTER knob is
set fully counterclockwise, CV will only increase the setting; if the knob
is set fully clockwise, CV will only decrease the setting.
The WET and MIX outs can be used simultaneously.
LED Indication
Upon startup, the LEDs indicate the selected bank:
•
LEDs glow white: Bank 1 is selected.
•
LEDs glow blue: Bank 2 is selected.
When
Hold Mode
is active, the LEDs flash and spin in a circle.
www.shift-line.com/
amodular
#
01
02
03
04
05
06
07
08
09
10
11
BANK 2 | BLUE
PROGRAM
Plate
Modulated
SkyNet
ShimUp
ShimDown
Universe M-1
Eva Min Arp
Eva Random Arp
Mechanics Delay
Reverse Delay
Force OctDn
DECAY
Decay
Decay
Decay
Decay
Decay
Decay
Decay
Decay
Delay+Fbk
Feedback
Not Used
CHARACTER
Pre-delay
Rate
LPF
LPF
HPF
Phase Rate
Rate
Rate
LPF
Delay Time
Detune
BANK 1 | WHITE
CHARACTER
Pre-delay
HPF
HPF
LPF
LPF
Flange Rate
Rate
Rate
Rate
Delay Time
LPF
DECAY
Decay
Decay
Decay
Decay
Decay
Decay
Decay
Decay
Depth+Mix
Feedback
Not Used
PROGRAM
Room
Spring
SkyNet-2
ShimUp-2
ShimUpDown
Universe M-2
Eva Maj Arp
Eva Octave Arp
Cm-112 StepFlt
Ping-Pong Delay
Force Roar
