Making Global and Other Important Settings — Function
149
CVP-210/208
Clock, Transmit Clock, Receive Transpose, Start/Stop
■
Clock
Determines whether the CVP-210/208 is controlled by its own internal clock or a MIDI clock signal received from
an external device. “INTERNAL” is the normal Clock setting when the CVP-210/208 is being used alone. If you are
using the CVP-210/208 with an external sequencer, MIDI computer, or other MIDI device, and you want the CVP-
210/208 to be synchronized to the external device, set this function to “EXTERNAL.” In the latter case, the external
device must be connected to the CVP-210/208 MIDI IN terminal, and must be transmitting an appropriate MIDI
clock signal.
■
Transmit Clock
Turns MIDI clock transmission on or off. When this is set to “OFF,” no MIDI clock or START/STOP data is
transmitted.
■
Receive Transpose
When this parameter is set to “OFF,” note data received by the CVP-210/208 is not transposed, and when it is set to
“ON,” the received note data is transposed according to the current CVP-210/208 keyboard transpose (page 144) setting.
■
Start/Stop
Determines whether incoming FA (start) and FC (stop) messages affect song or
style playback.
Message Switch
SYS/EX. Tx (TRANSMIT)
..................... Turns MIDI transmission of MIDI system exclusive message data ON or OFF.
SYS/EX. Rx (RECEIVE)
........................ Turns MIDI reception of MIDI exclusive data generated by external equipment
ON or OFF.
CHORD SYS/EX. Tx (TRANSMIT)
...... Turns MIDI transmission of MIDI chord exclusive data (chord detect — root and
type) ON or OFF.
CHORD SYS/EX. Rx (RECEIVE)
.......... Turns MIDI reception of MIDI chord exclusive data generated by external
equipment ON or OFF.
Transmitting MIDI Data — Transmit
Data Types in the MIDI TRANSMIT/RECEIVE Display
* Available in RECEIVE display only (page 150).
Note
Messages which are generated when the keyboard is played. Each message includes a specific note number
which corresponds to the key which is pressed, plus a velocity value based on how hard the key is played.
Control Change (CC)
Control change data includes pedal and any other controller data.
Program Change (PC)
Program change data corresponds to voice or “patch” numbers.
Pitch Bend (PB)
After Touch (AT)*
With this function, the Clavinova senses how much pressure you apply to the keys while playing, and uses that
pressure to affect the sound in various ways, depending on the selected voice. This allows you to play with greater
expressiveness and add effects with your playing technique.
FA, FC
MIDI messages for starting/stop-
ping the song or style. The “FA”
message corresponds to start,
and “FC” corresponds to stop.
A
E
D
C
B
1
2
3
4
5
6
7
8
Determines the
channel for changing
transmit settings.
Determines the Part for the
selected channel.
Turns transmission of the
specified data type on or
off. See below for details
on the data types.
The dots corresponding
to each channel (1-16)
flash briefly whenever
any data is transmitted
on the channel(s).
This determines which parts will
send MIDI data and over which
MIDI channel the data will be sent.
Summary of Contents for Clavinova CVP-208
Page 175: ...MEMO 175 CVP 210 208 MEMO ...
Page 176: ...MEMO CVP 210 208 176 MEMO ...