Yamaha Clavinova CVP-208, Owner'S Manual

Page: 143 / 180

Making Global and Other Important Settings — Function
143 CVP-210/208
Pedal-controllable Functions
* For best results, use the optional Yamaha FC7 Foot Controller.
The parameters below correspond to buttons [2
▲▼
] - [8
▲▼
], and their availability depends on the selected control Type. For example, if
SUSTAIN is selected as the Type, the parameters “HALF PEDAL POINT”, “MAIN”, “LAYER” and “LEFT” automatically appear in the display.
* For best results, use the optional Yamaha FC7 Foot Controller.
VOLUME* Allows you to use a foot controller (AUX pedal only) to control the volume.
SUSTAIN When the pedal is pressed notes played have a long sustain. Releasing the pedal immediately stops (damps) any sustained notes.
SOSTENUTO If you press and hold the pedal here, only the first note will be sustained (the note that you played and held when pressing the
pedal). This makes it possible to sustain a chord, for example, while other notes are played staccato.
SOFT Pressing the pedal subtly reduces the volume and slightly changes the timbre of notes played. It only applies to certain voices
— PIANO, for example.
GLIDE When the pedal is pressed the pitch changes, and then back to normal pitch when the pedal is released.
PORTAMENTO The portamento effect (a smooth slide between notes) can be produced while the pedal is pressed. Portamento is produced
when notes are played legato style (i.e., a note is played while the preceding note is still held). The portamento time can be set
via the Mixing Console display (page 125). It does not work for Natural voices.
PITCHBEND* Bend notes up or down while pedal is pressed. This can only be set to the AUX pedal and the CVP-210/208’s damper pedal.
MODULATION* Applies a vibrato effect to notes played on the keyboard. The depth of the effect increases while pedal is pressed. This does not
work for the Natural voices.
DSP VARIATION Same as the [VARIATION] button. This does not work for the Natural voices.
VIBROTOR ON/OFF Turns the “VibRotor” effect type (page 126) on and off. This only works for the Natural voices.
HARMONY/ECHO Same as the [HARMONY/ECHO] button.
VOCAL HARMONY Same as the [VOCAL HARMONY] button.
TALK Same as the [TALK] button.
SCORE PAGE+ While the song is stopped, you can turn to the previous score page (one page only).
SCORE PAGE- While the song is stopped, you can turn to the next score page (one page only).
SONG START/STOP Same as the SONG [START/STOP] button.
STYLE START/STOP Same as the STYLE [START/STOP] button.
TAP TEMPO Same as the [TAP TEMPO] button.
SYNCHRO START Same as the [SYNC. START] button.
SYNCHRO STOP Same as the [SYNC. STOP] button.
INTRO Same as the [INTRO] button.
MAIN A Same as the MAIN [A] button.
MAIN B Same as the MAIN [B] button.
MAIN C Same as the MAIN [C] button.
MAIN D Same as the MAIN [D] button.
FILL DOWN A fill-in plays, automatically followed by the Main section of the button on the immediate left.
FILL SELF Fill-in starts playing.
FILL BREAK Break starts playing.
FILL UP A fill-in plays, automatically followed by the Main section of the button on the immediate right.
ENDING Same as the [ENDING/rit.] button.
FADE IN/OUT Same as the [FADE IN/OUT] button.
FING/ON BASS The pedal alternately switches between the Fingered and On Bass modes (page 66).
BASS HOLD While the pedal is pressed, the Accompaniment Style bass note will be held even if the chord is changed. If the fingering is set
to “FULL KEYBOARD,” the function does not work.
PERCUSSION
The pedal plays a percussion instrument selected by the [4
▲▼
] - [8
▲▼
] buttons. You can use the keyboard to select the
desired percussion instrument.
LAYER ON/OFF Same as the [LAYER] button.
LEFT ON/OFF Same as the [LEFT] button.
OTS+ Calls up the next One Touch Setting.
OTS- Calls up the previous One Touch Setting.
SONG, STYLE, MIC, LEFT,
LAYER, MAIN These specify the part(s) that will be affected by the pedal.
HALF PEDAL POINT* You can specify how far down you should press on the right pedal until the damper effect (page 62) starts working. This
can be set for certain kinds of pedals, such as the AUX pedal (YAMAHA FC7) or the CVP-210/208’s damper pedal.
DEPTH Determines the depth of the left pedal effect, when SOFT is selected. This only works for the Natural voices.
UP/DOWN When GLIDE or PITCH BEND is selected, this determines whether the pitch change goes up (is raised) or down (is lowered).
RANGE When GLIDE or PITCH BEND is selected, this determines the range of the pitch change, in semitones.
ON SPEED When GLIDE is selected, this determines the speed of the pitch change, when the pedal is pressed.
OFF SPEED When GLIDE is selected, this determines the speed of the pitch change, when the pedal is released.
KIT When PERCUSSION is assigned to the pedal, all available drum kits are shown here, letting you select the particular
drum kit used for the pedal.
PERCUSSION When PERCUSSION is assigned to the pedal, all sounds of the selected drum kit (in KIT above) are shown here. This
determines the particular instrument sound assigned to the pedal.