CVP-202
34
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
You can use the settings in the KEYBOARD [RIGHT2] display page
to change the volume, octave, pan and detune of the voice selected using
the
RIGHT2 VOICE
function.
The settings you make in this page affect
any voices you select using the RIGHT2
VOICE function. Different settings cannot
be made for each voice.
■
Displaying the Second Voice Keyboard Settings
............
Press
[DIRECT ACCESS]
, then
[DUAL]
.
If the RIGHT2 VOICE function is selected
in the main display, you can also display
the KEYBOARD [RIGHT2] page by
pressing [DIRECT ACCESS] followed by
any one of the VOICE buttons.
➔
The KEYBOARD [RIGHT2] display appears.
You can switch between the KEYBOARD
[RIGHT2] page and the [RIGHT1] (page
31) or [LEFT] (page 37) displays using
the PAGE [
<
] and [
>
] buttons.
■
Setting the Volume of the Second Voice
...................................
You can use the
VOLUME
function in the KEYBOARD [RIGHT2]
page to change the volume of the second voice.
To adjust the overall keyboard volume,
use the KBD VOL function in the main
display (page 23) instead.
Z
Press the
VOLUME
button.
➔
The
VOLUME
function is highlighted.
VOLUME
• Range: 0 — 127
• Basic setting: 127
Changing the Keyboard Settings for the Second Voice
X
Adjust the volume of the second voice.
Use the data dial or
[–]
and
[+]
buttons to change the volume, or hold
down the
VOLUME
button to increase the volume.
Press the
[–]
and
[+]
buttons simultaneously to restore the basic setting.
■
Setting the Octave of the Second Voice
....................................
The
OCTAVE
function in the KEYBOARD [RIGHT2] display lets
you adjust the pitch of the second voice up or down by one or two oc-
taves. Press the
OCTAVE
button.
➔
The value changes each time you press the button.
OCTAVE
• Settings: –2 (2 octaves lower)
–1 (1 octave lower)
0 (no octave shift)
+1 (1 octave higher)
+2 (2 octaves higher)
• Basic setting: 0
Playing Two Voices Simultaneously — Dual Mode
Some voices have octave settings that
are selected automatically when the
voice is selected. (Such settings are not
displayed by the OCTAVE function.) You
can prevent the octave setting from
changing when a voice is selected by
setting the VOICE SETTING function
(page 137) to MANUAL.
➾
GUITAR
CUSSION
BASS
VOICE
XG
SYNTH.
OIR &
PAD
DUAL
SPLIT
REVERB
EFFECT
DIRECT ACCESS
32
