140
CVP-202
X
Select the file operation.
File operations cannot be performed
while the [SONG] lamp is lit. Exit the
Song mode before attempting to
perform a file function.
Use the second LCD button from the right to select the desired file opera-
tion:
LOAD
,
SAVE
,
DELETE
or
NAME
.
C
Press the START button.
➔
The file operation begins.
The subsequent steps for each file operation depend on the operation
you’ve selected. Refer to the corresponding instructions for each opera-
tion below.
■
LOAD
.........................................................................................................................................
When you select
LOAD
, the Load function display will appear. The origi-
nal internal data will be replaced when you execute the Load operation. Be
sure to save all important data to disk (see below) before using the Load op-
eration.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
138
Disk
First, select the desired file to be loaded. Press either of the two leftmost
LCD buttons to select the file, then press the
OK
button.
➔
An “
Are you sure?
” message is displayed. Press the
YES
button to load
the selected file, or the
NO
button to abort the Load operation.
■
SAVE
..........................................................................................................................................
When you select
SAVE
, the name entry function display for the file to be
saved will appear.
Press the
>
button to move the underline cursor, and select the character
position of the file name. (File names can contain up to twelve characters.)
➾
Use the data dial or [–] and [+] buttons to highlight the characters to be
input.
