54
CLP-955
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
7
M
Set the adjuster.
For stability, an adjuster is provided on the bottom of the
pedal box (B). Rotate the adjuster until it comes in firm contact
with the floor surface. The adjuster ensures stable pedal operation
and facilitates pedal effect control. If the adjuster is not in firm
contact with the floor surface, distorted sound may result.
■
After completing the assembly, please
check the following.
●
Are there any parts left over?
m
Review the assembly procedure and correct any errors.
●
Is the Clavinova clear of doors and other movable fixtures?
m
Move the Clavinova to an appropriate location.
●
Does the Clavinova make a rattling noise when you shake it?
m
Tighten all screws.
●
Does the pedal box rattle or give way when you step on the
pedals?
m
Turn the adjuster so that it is set firmly against the floor.
●
Are the pedal and power cords inserted securely into the
sockets?
m
Check the connection.
●
If the main unit creaks or is otherwise unsteady when you play
on the keyboard, refer to the assembly diagrams and retighten
all screws.
B
●
After assembly is complete, it will be necessary to remove the
keyboard string. This procedure is performed once only and the
string will never have to be reattached again. For instructions on
its removal, refer to the paper titled "REQUEST" that can be
found on the keys underneath the key cover (see page 10).
