81
CLP-685, CLP-675, CLP-645, CLP-635, CLP-665GP Owner’s Manual
Connections
Before using the
Bluetooth
function, be sure to read “About
Bluetooth
” on
page 129.
If your smart device is equipped with the
Bluetooth
function, you can input the
sound of the audio data saved in the smart device to this instrument and hear it
through the built-in speakers of the instrument. Also, you can record the input
audio data as an Audio Song (page 58).
Pairing with Smart Devices
If you wish to connect your smart device to the instrument via
Bluetooth
, the
smart device needs to be paired with the instrument first. Once the smart
device has been paired with this instrument, there is no need to perform
pairing again.
1.
Hold down the [FUNCTION] button for 3 seconds.
The pop-up window will appear which indicates that the instrument is
standing by for pairing.
To cancel the pairing, press the [EXIT] button.
2.
On the smart device, set the
Bluetooth
function to on and
select “CLPxxx” from the connection list.
For details, refer to the smart device owner’s manual.
After pairing is completed, the pop-up window will close, and the
Bluetooth
icon appears on the Voice display and Song display.
Using the
Bluetooth
Audio function
Bluetooth
availability
The models CLP-685, CLP-675, CLP-
645 and CLP-665GP are equipped with
Bluetooth
functionality; however, even
these models may not support
Bluetooth
,
depending on the country in which you
purchased the product. If the
Bluetooth
logo is printed on the control panel, this means that the product is equipped with
Bluetooth
functionality.
685
675
645
635
665GP
Bluetooth
logo
Pairing
“Pairing” means to register
Bluetooth
-equipped smart
devices on this instrument,
and establish the mutual
recognition for wireless
communication between the
two.
NOTE
Only one smart device can be
connected to this instrument at
a time (although up to 8 smart
devices can be paired to this
instrument). When pairing with
the 9th smart device has
succeeded, pairing data for
the device with the oldest
connection date will be
deleted.
NOTE
When the
Bluetooth
function of
this instrument is set to “Off,”
standby for pairing with the
instrument is not enabled
when holding the [FUNCTION]
button for 3 seconds. In this
case, set
Bluetooth
to “On”
(page 82), and then start
pairing.
NOTE
Make sure to complete the
settings on the smart device
within 5 minutes.
NOTE
If you are required to enter a
passkey, enter the numerals
“0000.”
Voice display
Bluetooth
icon
Summary of Contents for CLAVINOVA CLP- 685
Page 133: ......