Yamaha Clavinova CLP-625R, Owner'S Manual

Page: 22 / 39

Playing Various Musical Instrument Sounds (Voices)
22
CLP-625 Owner’s Manual
You can layer two Voices and play them simultaneously to create a more richly textured sound.
1.
Engage the Dual mode.
While holding down [PIANO/VOICE], simultaneously hold down two keys
between C1 and A1 to select the two desired Voices. For information on which
Voices are assigned to the keys, refer to “Voice List” (page 18).
The Voice assigned to the lower key will be designated as Voice 1, and the Voice
assigned to the higher key will be designated as Voice 2. You cannot assign the same
Voice to both Voice 1 and Voice 2 simultaneously in Dual mode.
To shift the Octave for each Voice:
While holding down [PIANO/VOICE], press one of the C5 – F5 keys.
To adjust the Balance between two Voices:
While holding down [PIANO/VOICE], press one of the F
♯
5 – F
♯
6 keys. When the
value is set to “0” (C6), the volume levels of the two Voices reset to their respective
default settings. Settings below “0” increase the volume of Voice 2, while settings
above “0” increase the volume of Voice 1, in relation to the other.
2.
To exit from Dual mode, press [PIANO/VOICE].
Layering Two Voices (Dual mode)
NOTE
The Stereophonic Optimizer
(page 13) is not effective when
you select C1 (“CFX Grand”)
for one of the two Voices.
-5 -3 -1 -1 0 0 +2 +1 +1 +4 +5
-6 0 -4 -2 -1 +1 +3 +6
C5 F5
Highest key
C1 A1
Lowest key
F
♯
5 C6 F
♯
6
Engaging
Dual mode
Shifting the octave
Adjusting the balance
Voice 1 Voice 2
NOTE
The Dual and Duo modes
(page 23) cannot be engaged
at the same time.
Setting range:
-1 – 0 – +1
Setting range:
-6 – 0 – +6